Sign in   |  Join   |  Help

iphone to Beovision 1 via rca?

rated by 0 users
Answered (Verified) This post has 1 verified answer | 7 Replies | 1 Follower

Lennart Hildeman
Not Ranked
Scania
67 Posts
OFFLINE
Bronze Member
Lennart Hildeman posted on Mon, Dec 31 2018 2:02 PM

Happy new year, but I have a problem: Trying to use the Beovision loudspeakers from my iphone. Should work, according to the manual, where it says that I should get a camcord option in the menu. What I get, though, is just TV, radio, DVD, settings, and TEXT. White nd red RCA are connected to the front panel, with the tele going into my ipone, but there is no sign of the connection working. Has anyone had the same idea?

Answered (Verified) Verified Answer

Guy
Top 50 Contributor
Buckinghamshire
1,566 Posts
OFFLINE
Gold Member
Answered (Verified) Guy replied on Mon, Dec 31 2018 3:03 PM
Verified by Lennart Hildeman

If you're using a Beo4 to control it:

To add CAMCORD, on the Beo4:

- Press Power and LIST together, the display should read ADD?

- Press GO.

- Press LIST until the display shows CAMCORD. then GO.

- CAMCORD should then be listed under LIST.

All Replies

Guy
Top 50 Contributor
Buckinghamshire
1,566 Posts
OFFLINE
Gold Member
Answered (Verified) Guy replied on Mon, Dec 31 2018 3:03 PM
Verified by Lennart Hildeman

If you're using a Beo4 to control it:

To add CAMCORD, on the Beo4:

- Press Power and LIST together, the display should read ADD?

- Press GO.

- Press LIST until the display shows CAMCORD. then GO.

- CAMCORD should then be listed under LIST.

Lennart Hildeman
Not Ranked
Scania
67 Posts
OFFLINE
Bronze Member

Thanks, Guy! I only have the Beovision-specific control with the four buttons on hand right now, so what you are saying is that I need the Beolink 4 to get this setup working?

 

Best regards

Lennart

Guy
Top 50 Contributor
Buckinghamshire
1,566 Posts
OFFLINE
Gold Member
Guy replied on Mon, Dec 31 2018 4:10 PM

Hmmm.  Not sure if it will work but I found this in the manual:

Note: While the CamCorder is connected, it will be possible to select CAMCORD via the display sequence - press DISPLAY, use << or >> to find CAMCORD and press GO to select.

 

 

 

Millemissen
Top 10 Contributor
Flensborg, Denmark
12,209 Posts
OFFLINE
Bronze Member

There must be a Shift function for that - just don’t remember which.

MM

There is a tv - and there is a BV.

Guy
Top 50 Contributor
Buckinghamshire
1,566 Posts
OFFLINE
Gold Member
Guy replied on Mon, Dec 31 2018 6:42 PM

Millemissen:

There must be a Shift function for that - just don’t remember which.

MM

Possibly, but no SHIFT button on Beo1 remote: https://www.beoworld.org/prod_details.asp?pid=693

Hence not sure how you'd do it on a BL1000

Lennart Hildeman
Not Ranked
Scania
67 Posts
OFFLINE
Bronze Member

Yeah, I saw that too, so I ordered a Beolink 4, since this seems to be the only workaround.

Lennart Hildeman
Not Ranked
Scania
67 Posts
OFFLINE
Bronze Member

You’re right: without the list function, nothing can be done. The 1000 is the best design, but it cannot crack this one. Happy new year!

Page 1 of 1 (8 items) | RSS
Beoworld Security Certificate

SSL