Sign in   |  Join   |  Help

Beocenter 2 timer

rated by 0 users
Answered (Verified) This post has 1 verified answer | 2 Replies | 0 Followers

frog
Top 150 Contributor
Camberley UK
505 Posts
OFFLINE
Founder
frog posted on Fri, Mar 9 2012 1:21 PM
Hi, My Beocentre is linked into my Beosystem 3 and I put timers on the Beosystem 3 to switch the radio on and off each morning. Trouble is, the Beocentre 2 now switches on (in addition to the time set on the Beosystem 3) one time. This has just started happening, and I have no idea why or how this timer was set - I just put it down to the Beoghost. There is an active timer set in the Beosystem 2, but I can't cancel it. By switching the timer to OFF, the Beocentre says that it has stored the new setting, but when returning to the timer menu, it says it is still on. Any ideas on how I can cancel the timer on the Beocentre 2?

Answered (Verified) Verified Answer

Peter
Top 10 Contributor
Earsdon
11,908 Posts
OFFLINE
Founder
Moderator
Answered (Verified) Peter replied on Fri, Mar 9 2012 3:15 PM
Verified by frog

I wonder if the options have been inadvertently reset? The BC2 should by default not use its timer when the BS3 is attached. The BC2 should be option 0 in most set ups as the speakers are no doubt attached to the BS3.

Peter

All Replies

Peter
Top 10 Contributor
Earsdon
11,908 Posts
OFFLINE
Founder
Moderator
Answered (Verified) Peter replied on Fri, Mar 9 2012 3:15 PM
Verified by frog

I wonder if the options have been inadvertently reset? The BC2 should by default not use its timer when the BS3 is attached. The BC2 should be option 0 in most set ups as the speakers are no doubt attached to the BS3.

Peter

frog
Top 150 Contributor
Camberley UK
505 Posts
OFFLINE
Founder
frog replied on Fri, Mar 9 2012 7:03 PM

That's it! Thanks.

Page 1 of 1 (3 items) | RSS
Beoworld Security Certificate

SSL