Sign in   |  Join   |  Help

Help needed with Atlona/Beoplay V1 setup

rated by 0 users
Not Answered This post has 0 verified answers | 2 Replies | 1 Follower

Tassos
Top 500 Contributor
Athens
238 Posts
OFFLINE
Bronze Member
Tassos posted on Thu, Nov 30 2017 6:08 PM

Hello all!

It is almost a year I am building a home cinema setup consisted from a BeoPlay V1 an EPSON 7300 and many different sources. As my V1 has no HDMI output I have a bought the AT-UHD-SW-52 in order to hook up all my sources and mirror them to the V1 and EPSON. I recently acquired a matrix activation key and I am trying to complete my set up but I run into some problems which I do not know how to tackle.

1 Although I choose the ATLONA device in the PUC list I can not control it via my remote (I have tried with a BEO 4 (DTV), a BEO 6 and a BeoRemote One).

2 It seems that the only device I can control is my popcorn hour which is connected to PUC 2A

3 PUC 2A will not control the matrix.

The goal is to be able to control all the devices connected to the matrix via a BEO 6 independently if video is played by the V1 or the EPSON.

 

Any help would be VERY welcome :-)

All Replies

StUrrock
Top 100 Contributor
991 Posts
OFFLINE
Bronze Member

Get this app then you can program the beo6 to work all the third party stuff.

 

It works well.

Tassos
Top 500 Contributor
Athens
238 Posts
OFFLINE
Bronze Member

StUrrock:

Get this app then you can program the beo6 to work all the third party stuff.

 

It works well.

Hello StUrrock

I have already programmed my beo6 to work with all the STBs I have but my setup is a hide-away. All STBs are inside a cupboard.

Page 1 of 1 (3 items) | RSS
Beoworld Security Certificate

SSL