Sign in   |  Join   |  Help

Beogram 1200

rated by 0 users
Not Answered This post has 0 verified answers | 2 Replies | 1 Follower

GPAudio
Not Ranked
1 Posts
OFFLINE
Bronze Member
GPAudio posted on Thu, Oct 5 2017 8:55 AM

Hi all,

First time on Beoworld forum.

I have a Beogram 1200.

Platter is not spinning when turned on.

Have been told by a technician that the motor is dead.

I am looking to replace motor.

Q1: Can I get a replacement motor.

Q2: Can I cannabalise from another Beogram model (I can get my hands on a Beogram1102 for example)

Any other advice?

Thanks in advance.

Cheers, GPAudio

Hobart, Tasmania, Australia

All Replies

Dillen
Top 10 Contributor
Copenhagen / Denmark
10,989 Posts
OFFLINE
Founder
Moderator

Welcome to Beoworld!

These motors don't "die". If a technician tells you your Beogram cannot be repaired, calling him a technician wouldn't be fair to
all other technicians. It's probably because he doesn't have a clue what to do and he found out, that this deck is not module-based and
B&O no longer carries any spares for it.
His rope wasn't long enough. 

Your motor will need servicing. 
Take it apart, clean, lubricate and put back together.
All very common for this type of motor after 40+ years. 

It's sinter bronze bearings so will need a little special treatment. Search this forum, the Beolover blog pages and/or
google around a bit and you'll know much more.
 
Q1. Yes, from a similar deck, but iIt would need the same treatment. They all will by now.

Q2. Generally no, even if Beogram 1800 share the same motor - but it would be worth restoring the 1800 as well - or even more.

Martin

rene grondin
Not Ranked
northern quebec canada
10 Posts
OFFLINE
Bronze Member

It is true that it cant die,just clean with isopropyl alcool and scotchbright, oil it with 5w40 synthetic motor oil and voila.

Page 1 of 1 (3 items) | RSS
Beoworld Security Certificate

SSL