Tesing this Beolab 5000 system before selling it,and i am surprised at how much better it sounds than my Beomaster 8000.
Henrik.
Beocord with fake cooling tower to match a Beomaster.I like it.
Martin
Hi Martin.
And did you notice the CDX that match the 8000 system
Henrik
This Beomaster 8000 got sold to Henrik some time ago. I hope it's still working great and got a service.
carlito:BV 10-32 all Black - not connected to the NL multiroom. Only an Apple TV is connected.
Super nice!
Love the way you have done the cabling into the floor.
Have the all black BV11 myself (on motor wall bracket). Looks real good on the easel stand
Livingroom: BL3, BL11, BV11-46 Kitchen: Beosound 1 GVA, Beocom 2 Bathroom: M3 Library: A6, Beocom 6000 Bedroom: M5 Office: Beocom 2 Travel: Beoplay E8 2.0, Beoplay P2
Carlito, Fantastic set up!!
Beosound 9000 MK III, Beosound 2300, Beosound Century, Beogram 5005, Beogram 1800, Beolab 8000, Beolab 5000, Beolab 4000, Beovision 8-32, Beovision 4-65, Beovision 10-32, Beoplay S3, Beoplay A2, Beoplay E8.
Duels:Looks really good Carlito
BeoNut since '75
New: Beovision Harmony, Beolab 50's, Beolab 18's, Beolab 17's, Beolab 3's, Beosound 9000 mk3, Beosound Stage & LG, Beosound 2, Beoplay M3, Beoplay A1, Beoplay H4 gen 2, Beoplay E8 3.0
Mikipedia on YouTube (finally )
https://www.youtube.com/c/Mikipedia
Old: Beovision Eclipse, Beolab 1's, Beolab 2, Beovision 10-46, Overture 2300, beolab 8000's, Beolab 4000's, Beovision avant 32" etc. etc.
Nice!
Please identify components, for those of us in the peanut gallery... Esp. the speaker whose width appears to *match!* the full frame (modulo photo parallax) -- and Esp.-Esp. the stand you used with a round-front floor foot. That is not a Samsung stand... (They have nice enough metal finishing on their higher models, but are crossfoots.) Hope this isn't one of Peter Pan's concoctions... or a curved screen and not just the photo -- that would be so disappointing. Thanks!
Kromer:That looks very stylish and nicely done
carlito: We moved to a new home with our previous B&O stuff. Installation done by myself
We moved to a new home with our previous B&O stuff. Installation done by myself
Nice! What’s that low board?
leogoeswild:it It was time to put the Samsung-build down to the floor
stampfki:Nice! What’s that low board?
stampfki:Nice! What’s that low board?I wondered that, too, but rather more specific: The vanity sink is a Geberit or maybe a Duravit, but its cabinet is not? It's worthy of note because that front panel is too large to be merely a single push-latch, but there's no pull for it to be a massive single drawer?!?? (The faucet and TP holder are Vola, the flush actuator is Geberit, and the plunger handle is "by others".:-)
trackbeo:I wondered that, too, but rather more specific: The vanity sink is a Geberit or maybe a Duravit, but its cabinet is not? It's worthy of note because that front panel is too large to be merely a single push-latch, but there's no pull for it to be a massive single drawer?!?? (The faucet and TP holder are Vola, the flush actuator is Geberit, and the plunger handle is "by others".:-)
Kromer:Inspired by Tuckers lovely beovision 4 setup, I thought I would try it out too It’s just a 4-50 but still a little too big, perhaps I should have looked up it’s actual size... but there it is. Can’t decide whether it’s a little too over the top though. And yes, the m100’s are the fronts (cx100 rears) shared with a bm4400. About that, has anyone got experience with a dodocus ubox3-a for automatic amp switching?
I love the BV4+BL10 setup - very nice! My dealer has a BeoLab 10 sitting around I think I'm going to buy it and stash it away until I have a BV4 to pair with it.
Beo4 'til I die!
carlito:
Separating the men from the boys!
Finished putting the BeoVision 10-40 on the wall today.
Removed the highboard and put the TV at its place.
Last Masterlink TV chosen to fit dirtecty in there with BeoSound 9000.
Unfortunately Beolab 5000 displays are not supported by the TV engine.
I followed the hint to put black acryl glas on top of the easily scratched cabinets - looks very clean now.
Ralf
Living Room: Beosystem 4, Beolab 7-2 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), no Subwoofer. Screen: Panasonic TX-P65STW60Home Cinema: Beosystem 4, Beolab 7-2 (Center), Beolab Penta 2 (Fronts), Beolab 4000 (Rears) and Beolab 2. Projector: Sony VPL-HW55Home Office: Beovision 10-40 on STB Bracket wall mount masterlinked to Beosound 9000 MK3 on horizontal wall bracket driving Beolab 5000 SpeakersBedroom: Loewe TV with Beolab 6002 and Beolab 11 (all white, wall-mounted)In storage: Beolab 5000/Beomaster 5000 (1960s).
leogoeswild: it It was time to put the Samsung-build down to the floor
it It was time to put the Samsung-build down to the floor
Lintronic is now offering a way to control the stand via remote without a B&O TV.
BeoSound 9000 MK3, BeoLab 8000, BeoLab 6000, BeoLab 3500, LCS9000, BeoLab 11, BeoLab 7.2, BeoLab 7.1, Beolab 4 PC, BeoCenter 2300, BeoSound Century, BeoSound 8, Beosound 2, BeoVision 7-40 MK2 , BeoVision 7-32 MK3, BeoVision 6-22, BeoVision 4-42, BeoMedia 1, BeoCom 4, BeoLink 1000, BeoLink 5, BeoLink 4 & BeoTime
BeoIce:Lintronic is now offering a way to control the stand via remote without a B&O TV. BeoSound 9000 MK3, BeoLab 8000, BeoLab 6000, BeoLab 3500, LCS9000, BeoLab 11, BeoLab 7.2, BeoLab 7.1, Beolab 4 PC, BeoCenter 2300, BeoSound Century, BeoSound 8, Beosound 2, BeoVision 7-40 MK2 , BeoVision 7-32 MK3, BeoVision 6-22, BeoVision 4-42, BeoMedia 1, BeoCom 4, BeoLink 1000, BeoLink 5, BeoLink 4 & BeoTime
A dream come true..
BL90 takin ova the job of my old BL5`s
Congratulations 🙂
MM
There is a tv - and there is a BV.
JensT:A dream come true.. BL90 takin ova the job of my old BL5`s
For inspiration, if you don't want to spend a big fortune on good sound.
Greeting / Peter Pan.
Thought I better take a pic on my Beovision 8 before it gets upgraded.
A bit of a contrast in style to the TV room...
leogoeswild:Was wondering if I should connect the BS3 to turn it, but looks like it is going away
I'll definitly find a good home with lots of care and use