Sign in   |  Join   |  Help

Beovision Avant amplifier + speakers

rated by 0 users
Not Answered This post has 0 verified answers | 8 Replies | 1 Follower

aymeric
Top 500 Contributor
Leiden
144 Posts
OFFLINE
Bronze Member
aymeric posted on Mon, Sep 29 2014 4:54 PM

Hi all.

I just removed the speakers + crossover + amplifier units from a beovision Avant.
I'd like to buy a power source for these amplifiers. But i don't have any clue how much Volts and Amperes it should provide.

In the picture are the connections shown. Is there anybody who knows which pin on the left side is + and - for the power supply? Or isn't it the left connection?

Also There are 4 pins on the right (audio?) Connector. Can someone tell me which pin is which? (left/right/ground/??).

This is the amplifier chip: http://www.qrz.ru/reference/micro/analog/stk4122ii.pdf

Thanks,

Aymeric 

All Replies

Beobuddy
Top 25 Contributor
Utrecht, The Netherlands
3,543 Posts
OFFLINE
Founder

Here:

 

http://archivedforum.beoworld.org/forums/t/27797.aspx

And:

 


aymeric
Top 500 Contributor
Leiden
144 Posts
OFFLINE
Bronze Member

Thanks! That is amazing :)

 

Bedankt beobuddy dit is precies wat ik zocht :)

Pearton_ante
Not Ranked
3 Posts
OFFLINE
Bronze Member

Hi

 

I am looking to do the same thing.

How did it work out for you?

Did it work?

 

Cheers

Andreas

nlanks
Not Ranked
28 Posts
OFFLINE
Bronze Member

I looked at this too but gave up. Also thought about using the Beocreate amp instead, but again never got round to it.

dudu_mec
Not Ranked
9 Posts
OFFLINE
Silver Member

Finally managed to get a clear sound from a project like this...

Was given the amplifiers and speakers from an old avant

With the help of beobuddy diagram i got a suitable transformer from an online store here in europe and a power supply pcb from eBay. If it's not against forum rules i'll post the links to where i bought them.

 

https://youtu.be/6dL2h1SfU8c

Any comments on circuit are appreciated.

 

BEOVOX141
Top 150 Contributor
Denmark, West
698 Posts
OFFLINE
Silver Member

Hi Duarte.

Nicely done, complete with the classic B&O aluminum trim! It goes to show that one mans trash is another mans treasure!

All about attitude and imagination!

You now basically have a Beolab 4000, since it really is-  the Avant speaker.

I dont see any fuse anywhere, which really is mandatory for all the right reasons! The rest is pretty much by the book! You even included a left, right switch!

To bad you already cut the big hole for the speakers, the extra volume you have available could properly have improved the system.

How is the sound? You actually put a ported system into a sealed box, what happens when you close the box ?

Anyway,-  Congratulations on a speaker for life Lets have a Party !!!

rajeegeorge
Not Ranked
2 Posts
OFFLINE
Bronze Member

dear Beobuddy 

You have shown a great mod the project im in but unfortunately I cannot understand the Dutch

 

Kindly translate in English, thanks in advance 

rajeegeorge
Not Ranked
2 Posts
OFFLINE
Bronze Member

please translate the schematic from dutch to English or send me a mod you have done to work 

to my email please 

rajee20042001@yahoo.com  

Page 1 of 1 (9 items) | RSS
Beoworld Security Certificate

SSL