Beovision stand for 10-40 / 10-46

13 replies
BE
Offline
BeoStoked
Bronze
Posted October 28, 2025 at 10:07 GMT
#1645150
hello all,

I’m hoping there might be someone out there with a stand for my beovision 10-40.

I believe that the stand is type 4666 and is suitable for both the 10-40 and 10-46 televisions.

its a long shot but if there are any out there in need of a new home please get in touch. I am based in the U.K.

Thanks in advance!
Ravsted
Offline
Ravsted
Bronze
Posted October 29, 2025 at 15:58 GMT
Edited October 29, 2025 at 16:13 GMT
#1671674
Just an alternative option.

If you are a 'handyman' ... it should be possible to convert a BV7-32 stand for the BV10-40.

Where I live there are many BV7 stands available and you get them more or less for free (<40£)

You can buy a DIN<>8 PIN micro-fit molex cable or solder one and make a plywood adapter plate yourself.

 
Tignum
Online
Tignum
Gold
Posted October 29, 2025 at 20:01 GMT
#1671676
Hi, +1 with Ravsted: check this thread too: /forum/general-discussion-and-questions/beovision-motor-stand-7-32-for-beovision-10-40,

I have a 7-32 stand spare (the 4091 floorstand), but it is in the Netherlands...

I own both stands actually and was curious for the heights.

My BV7-32 stand measures about 87cm (top of the footplate to top of the interface).

My BV10-40 stand measures about 62cm there, with an 8cm gap between footplate and TV.

So using this stand for a 10-40 would actually result in (87-62)+8=33 cm gap! Too much and ugly. Maybe the lower 4092 fits? Or shorten the pole handyman style?

Regards, Johan

Location: Netherlands

My B&O Icons:

Beoplay-A1.png Beoplay-A1.png
Beoplay-H95.png Beoplay-H95.png
Beoplay-P6.png Beoplay-P6.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beoremote-One.png Beoremote-One.png
Beosound-5.png Beosound-5.png
Beovision-10.png Beovision-10.png
Tignum
Online
Tignum
Gold
Posted October 29, 2025 at 20:29 GMT
#1671677
Maybe the lower 4092 fits?
That will be tight (112-80)! Shortening a 4091 sounds safer :-).
Regards, Johan

Location: Netherlands

My B&O Icons:

Beoplay-A1.png Beoplay-A1.png
Beoplay-H95.png Beoplay-H95.png
Beoplay-P6.png Beoplay-P6.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beoremote-One.png Beoremote-One.png
Beosound-5.png Beosound-5.png
Beovision-10.png Beovision-10.png
Ravsted
Offline
Ravsted
Bronze
Posted October 30, 2025 at 09:53 GMT
Edited October 30, 2025 at 09:53 GMT
#1671684
Hi, my thinking was not to modify the stand at all. I got a 10-40 hanging on the wall and a BV7-32 stand. I just placed them next to each other to illustrate how I would make the adapter plate. I looks a bit like a ghost :-)  - - but it is Halloween tomorrow - -  so.... :-) At the top you have 2 holes to bolt it to the original bracket. There is a small cut-out for the hinge. Put 2 bolts into the TV and slide it into the two cuts/slots at top. Fasten the bolts and add the additional 2 at the button. The cut-out at the button ensures the ventilation isn't blocked. A small bracket (drawn in grey) determines the tilt as the TV will lean forward by default due to the modified 'balance point'. This will put the TV at the original heigh above the stand-base i.e. approx. 8-10 cm.
Tignum
Online
Tignum
Gold
Posted October 30, 2025 at 21:37 GMT
#1671693
Hi Ravsted, hi Beostoked, Indeed things depend a bit on having the 'spider' on the back of the BV10-40 already or not!
I like your friendly ghost image!
J.

Location: Netherlands

My B&O Icons:

Beoplay-A1.png Beoplay-A1.png
Beoplay-H95.png Beoplay-H95.png
Beoplay-P6.png Beoplay-P6.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beoremote-One.png Beoremote-One.png
Beosound-5.png Beosound-5.png
Beovision-10.png Beovision-10.png
BE
Offline
BeoStoked
Bronze
Posted October 30, 2025 at 22:22 GMT
#1671695
Thanks for all of your inventive solutions, I’m not sure if I could realise any of the adapted designs but I am very grateful for the time you’ve taken to help.

out of interest, I know the 10-40 and 10-46 share the same stand but could anyone confirm that the ‘spider’ bracket (good description Tignum) between the tv and stand are also common to both sizes of tv ?

all the best and thanks once again!
Attachments (1)
Tignum
Online
Tignum
Gold
Posted October 31, 2025 at 10:32 GMT
#1671699
Hello Beostoked, the servicemanual is issued for both 40&46 and there is only one 'interface bracket' that I called spider:
No worries there!
Regards, Johan

Location: Netherlands

My B&O Icons:

Beoplay-A1.png Beoplay-A1.png
Beoplay-H95.png Beoplay-H95.png
Beoplay-P6.png Beoplay-P6.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beoremote-One.png Beoremote-One.png
Beosound-5.png Beosound-5.png
Beovision-10.png Beovision-10.png
multicare
Online
multicare
GoldModerator
Posted October 31, 2025 at 13:37 GMT
#1671702
Hi,

Just to chip in, we have a stand if you want it.

Collection welcome.

Location: Leeds, West Yorkshire

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovox.png Beovox.png
Beotime.png Beotime.png
Beosound.png Beosound.png
Beosound-Theatre-.png Beosound-Theatre-.png
Beosound-9000.png Beosound-9000.png
Beoremote-One.png Beoremote-One.png
Beolit.png Beolit.png
Beolab-18.png Beolab-18.png
Beogram-400x.png Beogram-400x.png
Bang & Olufsen classic service centre.
Repairs and refurbishment to both old and new.
BE
Offline
BeoStoked
Bronze
Posted October 31, 2025 at 13:43 GMT
#1671703
Hi multicare, thanks for your response. Do you have a link to the product that you could send?
or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold