LG sources disappear from Theatre

11 replies
YannChris
Offline
YannChris
GoldFounder
Posted July 4, 2024 at 19:43 GMT
#1643774
Hello,

Every now and then, LG sources disappear from the BR1 paired to my Theatre.

I have to power-cycle the set, then fiddle between the LG remote , the B&O app and the BR1 until the sources "come back" on the remote, which can take time.

Am I the only one to have this annoying "behaviour"?

If not, is there a step by step procedure to restore the sources in a straight forward way?

Kind regards,

Yann.

Location: Brittany, France

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovox.png Beovox.png
Beosound-Theatre-.png Beosound-Theatre-.png
Beoremote-One.png Beoremote-One.png
Beoremote-Halo.png Beoremote-Halo.png
Beoplay-P2.png Beoplay-P2.png
Beoplay-H95.png Beoplay-H95.png
Beoplay-Form-2i.png Beoplay-Form-2i.png
Beoplay-Earset.png Beoplay-Earset.png
Beoplay-Beosound1.png Beoplay-Beosound1.png
Beolab-50.png Beolab-50.png
Beolab-18.png Beolab-18.png
Beogram-400x.png Beogram-400x.png
Beocenter-2.png Beocenter-2.png
Infected at the age of 13 by a BG 4000 in Dad's Hifi shop.
SA
Offline
Sandyb
Bronze
Posted July 4, 2024 at 21:22 GMT
#1665317
Plenty of people have had it over recent months.

Hasn't happened to me in a while, but yes it took some fiddling to get them back.

 
SA
Offline
Sandyb
Bronze
Posted July 6, 2024 at 13:19 GMT
#1665361
Happened to my living room Theatre this morning, power cycle etc fixed it (albeit 5 minutes after restart).

Source list was fine in the app, just not on the BR1.
RP
Offline
rpaul
Gold
Posted July 29, 2024 at 10:55 GMT
#1665634
Hello all,

I have the same issue on my Beovision Theatre with LG G3 TV. Diconnecting mains for a few seconds and switching on again solves the problem for a while. Anyhow, this happens several times a day. Only happnes with the Beoremote One. The LG remote still works fine. Very annoying in deed to operate the setup with 2 remotes!!

Also intermittendly I get a message on the TV screen “Your Bang & Olufsen Product was disconnected. Please check that yor B&O product is connected to the TV via LAN.” Within milliceconds the message comes up “LAN being connected”.
Actually, my LAN is connected permanently and also works stable.

Regards R Paul

 

Location: Wiesbaden / Germany

SA
Offline
Sandyb
Bronze
Posted July 29, 2024 at 13:34 GMT
#1665635
I've reported this issue to B&O, so I'd suggest you do also (if you havent already).

My guess is that they have no idea why this is happening.
RP
Offline
rpaul
Gold
Posted July 29, 2024 at 13:41 GMT
#1665636
Thank you for the advice, will report it today to B&O.

Regards, R Paul

Location: Wiesbaden / Germany

TI
Offline
TinusAMS
Bronze
Posted July 29, 2024 at 16:51 GMT
#1665639
I have it as well, also with the Theatre LG G3 combination, not very often though. Once every few months. Rebooting the BR1 resolves it for me and is faster then powercycling the Theatre etc :)

My B&O Icons:

Beosound-Theatre-.png Beosound-Theatre-.png
Beosound-Balance.png Beosound-Balance.png
Beoremote-One.png Beoremote-One.png
Beoplay-A1.png Beoplay-A1.png
Beolab-28.png Beolab-28.png
Beolab-8.png Beolab-8.png
RP
Offline
rpaul
Gold
Posted August 11, 2024 at 08:35 GMT
#1665792
The first advice from B&O was to change the batteries in the Beoremote One and connect the WLAN to 5 GHz. Both actions did not solve the issue however, the error still comes up thus less frequently, only once a day. Now the issue is with B&O support. They requested a log from the B&O app at the time of error. Interesting fact, my local B&O dealer has the same error frequently. I hope they will find an error correction in Struer. I think, one can expect a fully funcioning product for this high price!

Regards, Paul

Location: Wiesbaden / Germany

RP
Offline
rpaul
Gold
Posted August 12, 2024 at 10:14 GMT
#1665813
This is the response from the experts. I just do not understand the first sentence in detail. The parameters they refer to are set as suggested in my setup. All over this is not a solution. I still think there is a SW bug which the B&O experts still did not pinpoint.

Location: Wiesbaden / Germany

RP
Offline
rpaul
Gold
Posted August 12, 2024 at 10:15 GMT
#1665814
Sorry, I forgot to insert the expert,s reponse:

Sumaira (Bang & Olufsen)

Aug 12, 2024, 02:51 GMT+2

Dear Reinpaul,

Thank you for patiently waiting. We have received feedback and would like to share the details with you.

We would like to confirm if it is possible to control your Theatre's internal source as radio or music. If yes, there could be a panel issue, kindly make sure that "Always ready" is disabled and quick start plue needs to be enabled.

Location: Wiesbaden / Germany

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold