Posts by huskvarn (archived2)
12 total posts11 results
Beosound 4 glass door belt.
in Imported Content (Unmapped) · Feb 11, 2021 12:34Hi, Same problem, were did you find the belt ? =) Thanks!!
Please help : Repairing a Beosound 9000 with ERR SLG31... making me mad
in Imported Content (Unmapped) · Dec 18, 2020 19:23So, I update the post. Battery change haven't change anything. BUT I've wired the outputs of the pulses to my scope and there were a problem with the sensor -> Dead on arrival... I've ordered a new one (received today) a…
Please help : Repairing a Beosound 9000 with ERR SLG31... making me mad
in Imported Content (Unmapped) · Dec 8, 2020 16:28So... Battery is at 3,18V but ordered anyway, have the age of the BS9000. Also received the micro match cable between the PCB and the sensor, same behavior. Have tried the MK3 Motor PCB on the MK1 it doesn't works (no mo…
Please help : Repairing a Beosound 9000 with ERR SLG31... making me mad
in Imported Content (Unmapped) · Dec 5, 2020 14:02Good clue.. Worth the try. I have just ordered the battery, never had been changed so it will be a good thing whatever the result. I've also ordered the small cable between PCB and sensor on RS, a little more than 2e. Ho…
Please help : Repairing a Beosound 9000 with ERR SLG31... making me mad
in Imported Content (Unmapped) · Dec 4, 2020 08:59Thanks. Mine is software 2.0 on the PCB18. Pin to pin test is done. Have also tried with chassis closed (to prevent day light even if on the data sheet of the sensor it says there is no problem). Have also noticed that t…
Please help : Repairing a Beosound 9000 with ERR SLG31... making me mad
in Imported Content (Unmapped) · Dec 4, 2020 08:31That is what I thought... Sensor is new (wheel is clean), cable is OK. PCB is 18 (MK1) but I have a PCB35 in stock. Will that works on MK1 ? Or can anyone sold me a PCB18 ?
Please help : Repairing a Beosound 9000 with ERR SLG31... making me mad
in Imported Content (Unmapped) · Dec 4, 2020 08:15Yes thanks but as I've said earlier I've tested the pulses and they are ok on the IC2... I've removed the shield and test directly on it. I've a good 0-5v signals on both quad input...
Please help : Repairing a Beosound 9000 with ERR SLG31... making me mad
in Imported Content (Unmapped) · Dec 4, 2020 07:58Also TM73 is passed. It says APS AJUSTED and just after if I try TM27 I have no error. But if I try a TM71 or to play CD2, same behavior : tilt and SLG 31...
Please help : Repairing a Beosound 9000 with ERR SLG31... making me mad
in Imported Content (Unmapped) · Dec 4, 2020 06:54Hi, Yes it read CD1 perfectly. Have cleaned and attached the glass but when I go to TM71, it tilt just after closing the glass (when it try to move the sledge...).
Replacement foams for Beolab 8000?
in Imported Content (Unmapped) · Dec 3, 2020 16:43Hi ! Just done this mod in the beginning of the week. The shop were closed but now it is open. The foam of mine were nasty, wet, ... horrible. Have a nice day Olivier
Please help : Repairing a Beosound 9000 with ERR SLG31... making me mad
in Imported Content (Unmapped) · Dec 3, 2020 16:36Dear all, I've been looking at B&O stuff for almost 20 years and I've decided to make the step and buy a complete set. Ok it was out of order but as I'm repairing electronic devices for almost 30 years I've make the deal…