Posts by Majlanky (archived2)
23 total posts18 results
Beogram CD X schematic inconsistency
in Imported Content (Unmapped) · Jul 21, 2021 19:05Do I understand correctly that the 1000uF instead of 1500uF was installed standardly? But I understand what you saying, just curious and want to be sure.
Beogram CD X schematic inconsistency
in Imported Content (Unmapped) · Jul 21, 2021 14:10Hello, I am trying to fix my Beogram CD X. I am now checking supply board and find weird fact in the schematics. The capacitor with number 2473 (the one in the air soldered to decoding board) should be 1nF 30V regarding …
Beocord 5500 rewind/fast forward
in Imported Content (Unmapped) · Jul 16, 2021 20:23So Dillen you were more than right. There were the following gear mechanism glued by dried vaseline. I cleaned it, check the rest and now machine works.
Beocord 5500 rewind/fast forward
in Imported Content (Unmapped) · Jul 16, 2021 20:23So Dillen you were more than right. There were the following gear mechanism glued by dried vaseline. I cleaned it, check the rest and now machine works.
Beocord 5500 rewind/fast forward
in Imported Content (Unmapped) · Jul 13, 2021 07:54I changed drawer belt only so far. The mechanic belt is still original one I guess. I just do not want to buy a new belt, do all replacement for nothing :-D I was looking into the service manual of 5500 but I am not sure…
Beocord 5500 rewind/fast forward
in Imported Content (Unmapped) · Jul 12, 2021 20:08Hello guys, I have exactly the same issues as described here: /forum/general-discussion-and-questions/delete-all-tuner-presets-on-a-beomaster-5500#post-1869772 but on Beocord 5500. If you do not want to read the inserted…
Recap listing for CD X
in Imported Content (Unmapped) · Apr 12, 2021 22:00Hello, does anybody here have a listing of material to recap whole machine? I know I can do it following the service manual but if anybody have listing with note of capacitor type with count it would be very helpful. Tha…
Beogram CD 5500 no sound on the right channel
in Imported Content (Unmapped) · Mar 20, 2021 20:48I replaced C100 and R126 and right channel is working now. Thx Martin!
Beogram CD 5500 no sound on the right channel
in Imported Content (Unmapped) · Mar 18, 2021 16:56Ok, I did the measuring and it looks like Martin was right. IC11 has 0V on pin 4 (negative) instead of -15V. Voltage on R126 is -15,26V and voltage on C110 is 0,67V. I will try to replace both capacitor and resistor and …
Beogram CD 5500 no sound on the right channel
in Imported Content (Unmapped) · Mar 17, 2021 19:41First of all, thank you very much for the response Martin... Do I understand correct I should check voltage on pin 4 because burned resistor R126 and shortened C110 can make wrong voltage? My apologies for stupid questio…
Beogram CD 5500 no sound on the right channel
in Imported Content (Unmapped) · Mar 17, 2021 15:47Ok, so I downloaded service manual and find a mute mechanism. I was thinking one of transistor (TR102 or TR103) is broken. But the mute mechanism works fine. Then I was following signal from cinch to the IC11 (Operationa…
Beogram CD 5500 no sound on the right channel
in Imported Content (Unmapped) · Mar 16, 2021 16:32Hello, I have a Beogram CD 5500. I have never you it. I get it as a present few years ago. Working so so. It reads and plays CD but there is no sound on the right channel. I checked cables between boards (the main board …
Beogram CD X - reading disc ends with ?
in Imported Content (Unmapped) · Mar 15, 2021 12:30Ok, it took some time, and to be honest I did not rush to solve it but finally, CDX is working. There is only one minor issue. First of all, I fixed all griplets on PCB 4 and PCB 5, tried run CD X unassembled and it was …
Beogram CD X - reading disc ends with ?
in Imported Content (Unmapped) · Aug 7, 2020 07:55Thank you very much Sonavor. I was hoping for you response. You told me what I need to here. There are no shortcuts right now :-D I have all tools I need now so I am going to investigate. I will let you know about my pro…
Beogram CD X - reading disc ends with ?
in Imported Content (Unmapped) · Aug 3, 2020 21:35Should I consider recaping, or you think there is an issue in an integrated circuit?
Beogram CD X - reading disc ends with ?
in Imported Content (Unmapped) · Aug 3, 2020 21:35Should I consider recaping, or you think there is an issue in an integrated circuit?
Beogram CD X - reading disc ends with ?
in Imported Content (Unmapped) · Aug 2, 2020 10:06Hello everybody. I have troubles with my CD X. I have read all topics here on the forum about CD X and its issues. I get my CD X many year ago as present in non-functional state. For many years I have been thinking the C…
CDX woes
in Imported Content (Unmapped) · Jul 31, 2020 22:12Hello everybody. I have troubles with my CD X. I have read all topics here on the forum about CD X and its issues. I get my CD X many year ago as present in non-functional state. For many years I have been thinking the C…