Repair Beogram 1202 lid

in BeoGram · Sept 25, 2019 09:17 GMT

EDIT I just noticed how old this is... 😴 Need more coffee.... Try the link below for a 3000. The cover should be the same, and at the end it shows you how it should be 🙂 If you have broken hinges, or if they are not re…

Beogram 1202 distorted sound

in BeoGram · Sept 25, 2019 09:12 GMT

Is it a noticeable "hum"? If so - check if it's grounded. The DIN - RCA plug I bought was improperly grounded, and I had the exact same issue. A wire from the ground connection inside the BG to the amp fully fixed the pr…

Beogram 3000 (5228) tone-arm ball bearing

in Imported Content (Unmapped) · Sept 25, 2019 09:09 GMT

So, I actually managed to figure it out 🙂 Was easier than I thought. For future reference, should anyone need it: Place the shaft back (I secured it with some light tape from the bottom, to prevent it from falling back …

Beogram 3000 (5228) tone-arm ball bearing

in Imported Content (Unmapped) · Sept 22, 2019 16:36 GMT

Hi all, I have recently acquired an (ab)used Beogram 3000, which I'm now in the process of getting back to working order, as it is stunning! The tone-arm was quite hard to move around, do I removed the entire arm and piv…