Posts by Wadeya001 (archived2)
12 total posts9 results
Does the MX4000 have a COMPOSITE/RGB mode?
in General Discussion & Questions · Jun 16, 2018 10:04100%. How hard is it to get to the solder points? Seems weird that’s RCA works fine I’ll have to figure out how all the plastic trim comes off the scart connector. I’m fine working on it, just never soldered scart connec…
Does the MX4000 have a COMPOSITE/RGB mode?
in General Discussion & Questions · Jun 16, 2018 10:04100%. How hard is it to get to the solder points? Seems weird that’s RCA works fine I’ll have to figure out how all the plastic trim comes off the scart connector. I’m fine working on it, just never soldered scart connec…
Does the MX4000 have a COMPOSITE/RGB mode?
in General Discussion & Questions · Jun 16, 2018 09:15My MX4000 has a green hue on the screen if a RGB SCART is connected. If I connect RCA via scart or wiggle the scart it doesn’t happen? Thinking either dodgy connection or it’s in composite mode and I don’t know how chang…
MX4000 Green Hue on screen intermittently usually when cold.
in General Discussion & Questions · Jun 16, 2018 00:48Just to let you guys know. I’ve opened this up and not dry solder points I have however figured out that it’s a scart connection issue. It doesn’t like RGB scarts? If you connect via scart to rca it’s fine but actual RGB…
MX4000 Green Hue on screen intermittently usually when cold.
in General Discussion & Questions · May 28, 2018 19:58MX4000 Green Hue on screen intermittently usually when cold.
in General Discussion & Questions · May 28, 2018 19:54This one is a MX4000. I replaced it due to the problem with a MX4002 that’s perfect apart from the screen internally being 1cm offcentre which I’ll also be trying to fix (made a different thread for that). I will open it…
MX4000 Green Hue on screen intermittently usually when cold.
in General Discussion & Questions · May 28, 2018 19:51Going open it up this week and start by stading back when on and looking for intermittent sparks on all the boards. If that fails I’ll have to test for continuity across boards but board order helps :)
MX4000 Green Hue on screen intermittently usually when cold.
in General Discussion & Questions · May 27, 2018 00:28Hay guys. My MX4000 has a green hue intermittently. I’ve got the feeling it will be a dry solder point on the board. But open to other causations. Im more than happy to open this up again and look for dry solder points a…
MX4002 Actual Screen Off Centre: Fix?!?
in General Discussion & Questions · May 22, 2018 20:11Hi people! Wondered if anyone has had the same problem as me and fixed it while I’m on holiday and can’t take my new MX4002 apart I thought I’d ask for help. I’ve got everything working on it and even adjusted the 20 set…