Posts by Sampep (archived2)
11 total posts8 results
Beomaster 1900-2 no power after disassembly
in Imported Content (Unmapped) · May 28, 2018 15:07So I bypassed the switch, 240v reading on the brown PCB where the power comes in. I re-souldered the thin copper wires that join the main PCB, which read 0.2v as did just about everywhere else. Replaced fuses too. Withou…
Beomaster 1900-2 no power after disassembly
in Imported Content (Unmapped) · May 17, 2018 21:51I have finally acquired a multimeter, 243 before switch, 0 after.. guess we have our culprit. Possible to get a replacement switch or any good alternatives out there? Would ideally have one rather than soulder the wires …
Beomaster 1900-2 no power after disassembly
in Imported Content (Unmapped) · Apr 28, 2018 21:38My voltmeter is about as old as the beomaster, only goes up to 15v. Possibly not up to the job? I have tried the wires blue and black wires that come out the switch and they max it out at 15v, not 100% sure on which ones…
Beomaster 1900-2 no power after disassembly
in Imported Content (Unmapped) · Apr 28, 2018 19:15Thanks for your replies chaps, Nick, no lights im afraid. I took a photo of.the wiring of the switch before and the wires are in the same places so I don't think that is it. And Martin, pulling the stiff wires didn't yie…
Beomaster 1900-2 no power after disassembly
in Imported Content (Unmapped) · Apr 28, 2018 12:19Hi all, Hopefully someone can help me out with this one, I recently attempted to restore a 1900-2 with Martins cap kit and rectifier - thanks by the way - but when I put it all together and turned it on there was nothing…
Beocord 1900 stuck pause
in Imported Content (Unmapped) · Mar 19, 2018 13:54Hi all, I have recently picked up a beocord 1900, all features appear to work but the pause button has stuck down! I took off the service panel and cant see anything obvious, the button will go down about 2mm but that wo…
Beomaster 1900-2 gradual hum
in Imported Content (Unmapped) · Mar 19, 2018 13:46Thanks have emailed you
Beomaster 1900-2 gradual hum
in Imported Content (Unmapped) · Mar 18, 2018 23:55Hi all, New to the forum, I've just picked up a beomaster 1900-2 with beovox s35s, Beogram 2202 and a beocord 1900, not a bad haul. Everything seems to be working great, all lights and functions etc. except the beomaster…