Suggestion for HDMI to RGB SCART (not CVBS SCART)?

in General Discussion & Questions · Oct 24, 2019 04:54 GMT

@manbearpig - You can generate a true 15khz RGB signal with a raspberry pi by adding two lines to the config.txt file as described here https://www.raspberrypi.org/documentation/configuration/config-txt/video.md To get 1…

Suggestion for HDMI to RGB SCART (not CVBS SCART)?

in General Discussion & Questions · Aug 13, 2019 04:05 GMT

Hey Kim, I explored this exact scenario a couple of years ago as a way of extending the life of my SCART only B&O gear. The generic HDMI to composite/svideo adapters are universally average due to the limitations of the …

Beocenter 2200 low output on right channel

in Imported Content (Unmapped) · Aug 9, 2018 00:23 GMT

Hi Dillen, I'm very pleased to report you were spot on with your diagnosis and bridging LP100 did the trick. Many thanks for the tip. Can you see any problems with leaving it shorted.. 19khz hitting the speakers directly…

Beocenter 2200 low output on right channel

in Imported Content (Unmapped) · Aug 8, 2018 00:59 GMT

Sorry also worth mentioning I have changed out all the capacitors in this path which had no effect.

Beocenter 2200 low output on right channel

in Imported Content (Unmapped) · Aug 8, 2018 00:58 GMT

Hi All, I've recently picked up a rather handsome Beocenter 2200 in need of some attention. Other functions work through the shared amplifier but the fm/ram/radio is not outputting anything on the right side channel. At …