Powerlink for Beomaster 5500

in General Discussion & Questions · Oct 3, 2020 14:37 GMT

Nick, you put me on the right way. I used the powerlink output board of a spare BM6500 and connected it to the BM5500 R253,R453 and ground as well as the trigger wire with R15 (all on PCB3). So I can use the BM5500 now w…

Powerlink for Beomaster 5500

in General Discussion & Questions · Sept 27, 2020 17:22 GMT

Hi Nick, unfortunately the power amp is not repairable, the printed circuit board itself is damaged. Can yoe provide a scheme how to modify the master circuitry to connect to a MCL2P? So far I connected the input to the …

Powerlink for Beomaster 5500

in General Discussion & Questions · Sept 27, 2020 15:39 GMT

Hi Steve, thanks for your response. However your suggestion does not help as there is no signal at the preamp out because the power amplifier is not working. Kind regards Hartmut

Powerlink for Beomaster 5500

in General Discussion & Questions · Sept 27, 2020 12:01 GMT

I have a Beomaster 5500 with defective not repairable power amplifier, How can I modify the BM to create a powerlink output to connect to MCL 2p?

Beogram 2202

in BeoGram · Jul 31, 2020 12:15 GMT

Thanks, you put me on the right way. I just increased the stylus pressure - now everything is working well. Previously I balanced the arm and adjusted the pressure to 1,5p. But that was obviously to low for the MMC 20S i…

Beogram 2202

in BeoGram · Jul 31, 2020 10:51 GMT

Yes, I did. In addtion to my previous description of the problem: starting a 30cm record the arm finds the correct cue-position, lowers and starts playing. Starting a 17cm record the arm finds the correct cue-position,bu…

Beogram 2202

in BeoGram · Jul 31, 2020 08:19 GMT

I recently bought a Beogram 2202 record player. It works fine so far except one problem. When I hit the "pause"-button the tonearm lifts and the platter stops turning as it should. However the tonearm is not fixed in its…

beocord 8002

in Imported Content (Unmapped) · Jul 8, 2017 11:32 GMT

I made following experience with my beocord: when I remove the belt from the pulley everything works fine, set time, Start time,stop time etc. Of course the tape is not moving. When I put on the belt everything works fin…

beocord 8002

in General Discussion & Questions · Jul 1, 2017 20:12 GMT

When starting play the display changed after 4 seconds to standby and the keypanel does not react anymore. The cassette however continues running and the device can only be stopped by unplugging. All functions are workin…

beocord 8002

in Imported Content (Unmapped) · Jun 22, 2017 10:30 GMT

Gerät funktioniert, Vorlauf, Ruecklauf, programmierter Start und Abschaltung, aber 4 Sekunden nach Druecken der Playtaste zeigt das Display das Standby-Symbol. Danach ist das Tastenfeld abgeschaltet, das Laufwerk läuft a…

Beolink 7000

in General Discussion & Questions · Jan 17, 2017 10:55 GMT

I measured the voltage at the Poti. It can be adjusted but only up to a max of .8V

Beolink 7000

in General Discussion & Questions · Jan 16, 2017 17:15 GMT

The white symbols in lcd-display disappeared completely, after they showed up in different intensities frequently. The exchange oft the backlight-foil did not help at all. Anybody there who has an idea how to fix the Pro…