Beovision Avant 55 mk1 screen fault

in General Discussion & Questions · Feb 16, 2022 12:11 GMT

Hi, I have the same issue, purple screen and got a new motherboard. Will just a swap of motherboard work or we need to change the serial number to match the system using a service tool? is it the motherboard on the right…

Beovision Avant 55 mk1 screen fault

in General Discussion & Questions · Feb 16, 2022 01:05 GMT

Hi, Willie Satanek or other B&O experts: I got an used beovision avant 55 with defective screen and got a donor motherboard from another beovision that had a crack screen. - Will the swap of the motherboard fix the issue…

Beolink Converter NL/ML Issue

in General Discussion & Questions · Jan 28, 2022 18:17 GMT

Issue with a used 1890 model. The green light is blinking for about 1 minute and then shut off. Is this a normal behaviour? or should the light stay solid green? When the button is pressed, whenever the number of blink a…

The slick Beo1 remote - compatiblity and modification

in General Discussion & Questions · Jan 4, 2022 15:30 GMT

Hi beovirus community, I am referring to the original Beo1 https://beocentral.com/beo1 not the new Beo one remote. This original remote used the same frequency as beo 4 but seems compatible only with the Beovision 1 and …

Beosound core connexion with beolab 5 and pre-amp

in General Discussion & Questions · Dec 20, 2021 00:13 GMT

The beosound core is excellent for music output in full digital format to the digital port of my old beolab 5 (using a spdif to digital coax converter, using synch cable and beolink cable). I have been trying unsuccessfu…

Beolab 5 & core

in General Discussion & Questions · Jun 27, 2021 15:02 GMT

Make sure you use fully wire power link mark II cable. You can get them from Steve, the best cable in the world.

Beolab 5 & core

in General Discussion & Questions · Jun 27, 2021 14:59 GMT

Hi Gary, not sure if you got your problem fixed. You need power link mark II cable between the beolab 5 (the thick fully wired one). You can get it from steve.

Beolab 5 & core

in General Discussion & Questions · Jun 27, 2021 14:59 GMT

Hi Gary, not sure if you got your problem fixed. You need power link mark II cable between the beolab 5 (the thick fully wired one). You can get it from steve.

Beolab 5 & core

in General Discussion & Questions · Jun 27, 2021 14:59 GMT

Hi Gary, not sure if you got your problem fixed. You need power link mark II cable between the beolab 5 (the thick fully wired one). You can get it from steve.

Beolab 5 & core

in General Discussion & Questions · Jun 27, 2021 14:59 GMT

Hi Gary, not sure if you got your problem fixed. You need power link mark II cable between the beolab 5 (the thick fully wired one). You can get it from steve.

Open an handset Beocom 5

in General Discussion & Questions · May 19, 2021 21:47 GMT

Its a 6 step process if you just want to replace the battery: 1) the bottom bezel with the B&O name can be push up, you need a small flat plastic tool to unglue it. 2) below that bezel, there is another flat bezel that a…