Posts by Lozo (archived2)
20 total posts16 results
Beocord 6500 plays tape but won't rewind/fast forward
in Imported Content (Unmapped) · Nov 16, 2016 21:11I've cleaned up and lubricate the gears under the two capstan wheels and shortened the belt (aprox . 4cm) and YESSSS: it does frwd/rwd 🙂(I've heard a little click just before it goes). Once again, thanks Martin for your…
Beocord 6500 plays tape but won't rewind/fast forward
in Imported Content (Unmapped) · Nov 16, 2016 16:45A little precision here: when i try ff/rwd without any tape by pressing the 5 little plastic bars at the top of the cassette place, the FF/RWD get moving but stops after 5 seconds. Is it normal?
Beocord 6500 plays tape but won't rewind/fast forward
in Imported Content (Unmapped) · Nov 16, 2016 16:29I have tried to verify the motor of ff/rewind with a seperate power block under 5V and it spins as it should, so there is no motor or power problem it seems. Could it be a simple matter of rubber belt, even if the play f…
Beocord 6500 plays tape but won't rewind/fast forward
in Imported Content (Unmapped) · Nov 16, 2016 16:28I have tried to verify the motor of ff/rewind with a seperate power block under 5V and it spins as it should, so there is no motor or power problem it seems. Could it be a simple matter of rubber belt, even if the play f…
Beocord 6500 plays tape but won't rewind/fast forward
in Imported Content (Unmapped) · Nov 16, 2016 15:08Hello Martin. Yes it does try, both ff and rewind. The rubber wheel moves the tape into the cassette but the two cabestans don't move so the beocord stops before the tape gets unwinded into the tape or round the rubber w…
Beocord 6500 plays tape but won't rewind/fast forward
in Imported Content (Unmapped) · Nov 15, 2016 22:56Hello y'all. Well, it's all in the title: my beocord 6500 (the lovely white one) can play a tape but refuses to fast forward or rewind it. I've checked the belt (this model has only one) that seems to be OK and i've trie…
Beocord 6500 belt change
in Imported Content (Unmapped) · Feb 8, 2016 15:26Hi all you beophilians. I'm working on a Beocord 6500 that wouldn't play tapes. So, I opened it up, expecting to have a belt change on the go. Except that the only belt I found seemed to be in place and in good working o…
Beocord 1200 belts change
in Imported Content (Unmapped) · Feb 1, 2016 15:49Hello all you Beophilians. I got that Beocord 1200 that needs some belts change. I got some at Ebay, make the change for the bigger one at he back of the main panel, that was the easiest part. Problem is with the 2 other…
Beomaster 6000 volume control problem
in Imported Content (Unmapped) · Jan 30, 2016 10:13Yes, I have noticed the belt was a bit sliding after I had put out the motor. So I cut 2/3 millimeters of the belt, re-glue it and put it back in place. Working fine, but it's cool to know that I would had find such piec…
Beomaster 6000 volume control problem
in Imported Content (Unmapped) · Jan 30, 2016 10:05Too much looking inside makes me forget to look at the frontside! ❓
Beomaster 6000 volume control problem
in Imported Content (Unmapped) · Jan 30, 2016 00:06I 'll check the connectors and trimmers and if it's not enough, well, I should resign myself to go down to that "service manual, chapter 5-5, volume adjustement" and try to understand what "step 0" and "step 30" means😂.…
Beomaster 6000 volume control problem
in Imported Content (Unmapped) · Jan 29, 2016 20:34Bingo! A gearing had moved inside the gearbox and was blocking the motor. Cleaning + greasing and I have my volume back🙂.Mucho thanks to you, Bristol 🤒 . I have now a minor problem with that motor that continues to spi…
Beomaster 6000 volume control problem
in Imported Content (Unmapped) · Jan 29, 2016 09:41Well, I think i will do that and i'll let you know the results. Is the gear box can be opened too? Hope i will not need no special tool...
Beomaster 6000 volume control problem
in Imported Content (Unmapped) · Jan 28, 2016 21:59Thanks Bristol for the reply. I didn't apply too much force trying to rotate the wheel, I know these old B&O ladies doesn't like to be forced 😕. I read 6,72V with the up arrow (volume up) and 6,32V with the down arrow (…
Beomaster 6000 volume control problem
in Imported Content (Unmapped) · Jan 28, 2016 20:38Thanks for the quick reply. The wheel won't move, even when i try to move it by hand. Totally blocked, even if it was functionning before I did some cleaning. I don't hear the motor running. But when I move the wheel wit…
Beomaster 6000 volume control problem
in Imported Content (Unmapped) · Jan 28, 2016 16:19Hello all you Beophilians. I have a Beomaster 6000 that works fine except with the volume control. I've opened it, and noticed that the axis of the motor of the volume control is blocked. What should I look first to get …