Posts by Musikmann (archived2)
10 total posts9 results
Beogram TX2 with MMC1
in Imported Content (Unmapped) · Jul 2, 2015 23:21Lee, you nailed it! I didn't remember there was a ground wire [doh]. The only snag was the connector wouldn't fit onto the ground post on my preamp (McIntosh C28). So I had to crimp it with some small pliers to make one …
Beogram TX2 with MMC1
in Imported Content (Unmapped) · Jul 2, 2015 14:35WOW Lee, you might have the solution! I just checked and the ground wire on the TT is hanging loose. It's a bit of a bother to get at the back of the preamp but that's the first thing I'll do. Much appreciated!!
Beogram TX2 with MMC1
in Imported Content (Unmapped) · Jul 1, 2015 23:25It might not be Lee, and thanks for the suggestion, I'll check that as soon as I can.
Beogram TX2 with MMC1
in Imported Content (Unmapped) · Jul 1, 2015 23:05My pre-amp has a phono1 and a phono2 input and the B&O is in phono1 right now. I also have a Thorens TD160 that I can try plugging into the same input. OR, switch the B&O from phono1 to phono2. I think my preamp is OK be…
Beogram TX2 with MMC1
in Imported Content (Unmapped) · Jul 1, 2015 22:53Hi Martin, thanks for helping me troubleshoot this. When I lifted it there is still a buzz or hum.
Do any of you use a machine for cleaning vinyl?
in General Discussion & Questions · Jul 1, 2015 21:49I have never used anything powered by electricity but have always wanted the one made by VPI or there is another one that I've forgotten the name of ($$$$). I have no idea if either of those are still being manufactured.…
Beogram TX2 with MMC1
in Imported Content (Unmapped) · Jul 1, 2015 21:39Thanks for explaining how to do that Dave. Now there does seem to be a slight problem. I hear a hum when the needle first hits the record and before it gets to the music. Later it is still there, not just as apparent.
Beogram TX2 with MMC1
in Imported Content (Unmapped) · Jul 1, 2015 18:59Thanks for the welcome and the advice. Just in case I should probably have an extra belt anyway. I'll look over the forum categories to find out how to order from you. At the moment, I know nothing about the store I ment…
Beogram TX2 with MMC1
in Imported Content (Unmapped) · Jul 1, 2015 18:19Hello Friends, I'm very new here so please forgive me if this duplicates another old or newer thread. I have had the above mentioned TT since I bought it new and primarily wanted it for the linear tone arm to protect my …