Beomaster 1700 ON/OFF switch needed

in Imported Content (Unmapped) · Nov 14, 2017 14:25 GMT

Hi guys, Does anyone by chance have the on/off switch for the Beomaster 1700 / 1600? The one with the glass... I need only the inside part with the tiny metal parts to solder the power wires to. Or just those metal parts…

Beomaster 2200 blowing fuse

in Imported Content (Unmapped) · Jul 20, 2017 20:47 GMT

It was indeed a short circuit in this triac! Changing it solved the problem of the blowing fuse. At least now I can see that the left channel is dead :-) But it will be easy to fix, since I have a good signal coming to t…

Beomaster 2200 blowing fuse

in Imported Content (Unmapped) · Jul 16, 2017 12:56 GMT

Hi to all, I've got a Beomaster 2200 in restoration now. The 1.6A fuse from is constantly blowing. I disconnected the power supply module from the main board, fuse is still blowing, so I assumed the problem is with the p…

Beomaster 4000 Tuner issue

in Imported Content (Unmapped) · Mar 30, 2017 11:32 GMT

Oh that's how it works, thanks as always, Martin!

Beomaster 4000 Tuner issue

in Imported Content (Unmapped) · Mar 30, 2017 11:01 GMT

So...finally the device is working properly now. Here's a small report of what I did for those who may be interested. As I said earlier, the tuner didn't work at all, I just heard static hum from the speakers and couldn'…

Beomaster 4000 radio problem

in Imported Content (Unmapped) · Mar 16, 2017 20:10 GMT

Guys, does anyone know what type is the TR10 transistor? I'm confused, cause in my manual I find three (3) types corresponding to the part number 8320161: BC261B, BC212B-L and BC251B.

Beomaster 4000 Tuner issue

in Imported Content (Unmapped) · Mar 12, 2017 08:59 GMT

OK, after another inspection I found the bad connection of the wires coming from the tuner board, after resoldering them, I have now sound (the FM hum) coming from the speakers. Tuning scale doesn't help and it cannot ca…

Beomaster 4000 Tuner issue

in Imported Content (Unmapped) · Mar 11, 2017 17:01 GMT

Hi to all Beolovers! I've got a nice Beomaster 4000 being restored now. One channel was dead and the volume was very low in the other. I have diagnosed with my diy signal tracer and changed the faulty MJ2501 output trans…