Posts by villeke (archived2)
11 total posts9 results
Beomaster 900 Stereo decoder
in Imported Content (Unmapped) · Jul 19, 2018 18:49I'm looking for a FM Stereo decoder for Beomaster 900. Would be nice with original screws and fabric shims. Please contact by E-mail, keranvil (at) gmail.com.
Beomaster 900, dial not accurate
in Imported Content (Unmapped) · Jul 19, 2018 18:44Thank you for the answer, Martin! I found a circuit diagram inside the Stereomaster, I have to find a right service manual for Beomaster that is for the same kind of version. As far as I know, the Finnish Radio History A…
Beomaster 900, dial not accurate
in Imported Content (Unmapped) · Jul 16, 2018 20:56Hello all, I have a Helvar Stereomaster 1000 (the same as Beomaster 900 but made in Finland). Only fault with the device is that the tuning indicator at least in FM is not accurate. At 88 Mhz the pointer shows about +0.3…
Beomaster 6500 slight overhaul
in Imported Content (Unmapped) · Jul 16, 2018 20:37[quote user="BeoMedia"] However, trying to start it up from standby at a later time (i.e. after it has been connected to the mains for some time) it is again not very sensitive at all to receive an ir command like RADIO …
Beomaster 6500 slight overhaul
in Imported Content (Unmapped) · Nov 9, 2015 18:41The Beomaster has worked now like a charm for one year after I fixed the issue with the relay board. The fault was in the board itself, there was a broken contact which was only visible with magnifying glass. Jump wire f…
Beomaster 6500 slight overhaul
in Imported Content (Unmapped) · Nov 14, 2014 16:02Ok, today I did some tests and measurements. The relay is functioning OK, when I connect headphones the relay clicks. I did some measurements and I think the fault must be in the transistor TR2. It should ground the rela…
Beomaster 6500 slight overhaul
in Imported Content (Unmapped) · Nov 13, 2014 23:05Thanks to Martin for supplying me the correct relay! Long weekend now so I started to get familiar with the Beomaster. I began with changing the operating voltage to 240V. After that, soldering the PCB7 off and the old r…
Beomaster 6500 slight overhaul
in Imported Content (Unmapped) · Nov 10, 2014 18:08Thanks! Yes, I tried to click the relay several times, but it didn't fix the problem. Also, when I changed the speakers to port 2, the volume level was noticeable louder than in speaker port 1. So I assumed that the rela…
Beomaster 6500 slight overhaul
in Imported Content (Unmapped) · Nov 9, 2014 17:40[quote user="tournedos"] [/quote] Hello all from Finland! I just got my first B&O device, a beautiful Beosystem 6500. I have noticed only one minor fault in the system. The right output of speaker 1 in the Beomaster 6500…