Posts by Daveleeander (archived2)
9 total posts7 results
4002 5511 Started running very slow on 45 RPM Speed
in BeoGram · Jan 7, 2014 16:02I do balancing of fans, pumps, etc. as part of my living. In order to measure the phase of the unbalance, I employ a laser tachometer. So to measure the RPM of the turntable, I put a piece of reflective tape on the platt…
4002 5511 Started running very slow on 45 RPM Speed
in BeoGram · Jan 5, 2014 03:24Mine was slow on 33 and varied from 31.577 up to 32.212. R15 pot took care of mine. Now running 33.014 - 33.118.
BEO 4002only has one channel operating....buzz on other
in Imported Content (Unmapped) · Jan 5, 2014 00:38I have found my answer. Yes, the needle has everything to do with stereo sound. I took the needle off, cleaned the connections and put it back on (after also cleaning the mating connections on the tone arm) and both chan…
BEO 4002only has one channel operating....buzz on other
in Imported Content (Unmapped) · Jan 4, 2014 23:49I have cured the tracking problem with my turntable, but now find I only have onc speaker channel working. I switched the plugs around and the problem went to the other speaker, so I'm pretty well satisfied that one chan…
Beogram 4002 Won't play-Everything works
in Imported Content (Unmapped) · Dec 29, 2013 17:21I could not get the arm to move on the lead in groove, but everything else worked (when pressing buttons and bypassing the shutter, everything does well). I took the top off the unit, and found that someone had replaced …
Beogram 4002 Won't play-Everything works
in Imported Content (Unmapped) · Dec 27, 2013 01:56Yes the belt is on the motor. The arm and detector will go all the way across and all the way back. I have the shell off so I can see what is happening The tracking force is set at 1.1 G with a MMC 10E cartridge on it. I…
Beogram 4002 Won't play-Everything works
in Imported Content (Unmapped) · Dec 27, 2013 00:03I just received a B&O 4002 for Christmas from my three daughters that was supposed to be recently serviced, etc., but it won't play any vinyl. Everything works with the exception when the arem goes over and lowers unto t…