Posts by kneedeepinit (archived2)
6 total posts6 results
Beogram 8000 sometimes won't spin at startup
in BeoGram · Apr 6, 2014 22:52it wasn't but it is now and no differrence. BTW, now it makes sense how the turntable works.
Beogram 8000 sometimes won't spin at startup
in BeoGram · Apr 6, 2014 16:48it is defintaley a 160v 0.47 uf rubycon capacitor. It is the only rubycon in the unit so it may have been changed by the previous owner. He dealt with thte B&O shop locally so i doubt if it was an ineperienced tech. I re…
Beogram 8000 sometimes won't spin at startup
in BeoGram · Apr 5, 2014 17:55almost all the caps, the cpu was the hard one as you had to disassemble it and then each end of the cap had to fit into the hole plus have a extra conductor solddered to it. If I made an installation error, it was probab…
Beogram 8000 sometimes won't spin at startup
in BeoGram · Apr 5, 2014 13:58the platter spins easily by hand. I will double check the solder joints.
Beogram 8000 sometimes won't spin at startup
in BeoGram · Apr 5, 2014 02:52Well, I finally got the recap done. It is not an easy job but I feel confident I did it right. I now have two issues 1) i need a new belt for the linear tracking device. It was slipping. I shimmed the motor up with a was…
Beogram 8000 sometimes won't spin at startup
in BeoGram · Nov 29, 2013 00:41I hope this works. I have the same problem with my 8000 and I am ordering a kit from Dillen. This turntable is the only piece of electronics that i cansider an absolute keeper. I have bought and sold a lot of gear and th…