Posts by Livius (archived2)
33 total posts29 results
IR eye and NL/ML converter
in General Discussion & Questions · Oct 19, 2016 08:13thanks, that's great. do you happen to know whether I could connect a non-b&o TV to the line-in of the ml/nl and have it play to BLs attached to the ml/nl? I'd assume it should work, but don't know whether video and audi…
IR eye and NL/ML converter
in General Discussion & Questions · Oct 17, 2016 19:39so, you can still play from BS4 to the ml/nl attached speakers? in this case, the music is a NL signal that can be joined by the V1 or any other NL player (A9, BS1, etc)? Yes, the BS4 outputs sound to the speakers attach…
IR eye and NL/ML converter
in General Discussion & Questions · Oct 16, 2016 08:02Got it, this is very helpful. Thanks. Let me see whether I fully understand and ask some more questions. 1) Your BS4 via the ML/NL acts as a NL device. You play CDs from your BS4 via your V1. You do this by selecting the…
IR eye and NL/ML converter
in General Discussion & Questions · Oct 15, 2016 20:13So, you are using the PL, ML and NL connection all at the same time? >> Sometimes. Your BS4 and V1 all use / play to the BLs attached to the PL of the ML/NL, right? No, The BS4 has no speakers and is using the V1 speaker…
IR eye and NL/ML converter
in General Discussion & Questions · Oct 9, 2016 17:20I have BLs attached to the ML/NL Converter. Attached are an BS4 via ML and V1 via NL. An IR Eye is connected as well. I can press the join button on the IR Eye and it will join the active session, either from the NL or M…
IR eye and NL/ML converter
in General Discussion & Questions · Oct 6, 2016 15:22This is correct, I have an NL/ML converter is such a setup. With speakers and an IR eye the NL/ML converter acts like it is an ML Active kit.
How can you tell (easily) that a BeoSound 4 has the DAB+ upgrade ? Want to check an auctioning BS4 remotely.
in General Discussion & Questions · Apr 14, 2016 21:18A new version of the BeoSound 4 software was made in order to support DAB+. it is a later version than stated here: http://archivedforum2.beoworld.org/wikis/revisions/beosound-4-software-change-log.aspx
Retrofitted DAB+ Module on BeoSound 4
in General Discussion & Questions · Feb 13, 2016 18:13When upgrading the BS4 with DAB+, a software upgrade is required. You can check the software version: AP 2.92I to see if the BS4 Support DAB+
beosound 4 software
in Imported Content (Unmapped) · Jan 29, 2016 08:11Er is een nieuwere software versie, die grotere SD kaarten ondersteund: http://archivedforum2.beoworld.org/wikis/revisions/beosound-4-software-change-log.aspx Een dealer kan de BS4 updaten naar de laatste stand.
Dect phones unsafe for you? Affecting your health
in General Discussion & Questions · Dec 31, 2015 11:08The sites are talking about the synchronization signal send by the base station every 10ms. In rest a DECT handset is not sending any signal, only the base station. A DECT handset next to a bed would therefor not be an i…
Essence Mk 2 (et al) unpacked
in General Discussion & Questions · Aug 29, 2015 15:44Have a look at the menu configuration / nl management. Here you can find all the NL sources and you can remove the ones you do not have.
Gratis BeoVision 3-32 MKIII
in Imported Content (Unmapped) · Jul 20, 2015 19:52De BV3 heef een nieuwe eigenaar.
Gratis BeoVision 3-32 MKIII
in Imported Content (Unmapped) · Jul 18, 2015 09:12Wie is er blij te maken met een BeoVision 3-32 MK3, zwart zonder AB Met een motorbase en twee extra randen blauw en geel. Als reserve nog een niet AR contrast scherm. Hij is op te halen in Ermelo
Beolab 4/Beolab 14
in General Discussion & Questions · Jul 9, 2014 15:28The BeoLab 14 Sub has a 4 position type switch to select the type of input. There are 2 modes when B&O equipment is attached to the Sub - Systems from before the new audio processing platform, i.e. using the DIN PowerLin…
Beolab 4/Beolab 14
in General Discussion & Questions · Jul 8, 2014 20:37For the 2.1 setup you connect the Sub output from the TV to the BeoLab 14 Sub as well. The speaker types should be set to BeoLab 5 on the BV10 and Subwoofer should be enabled on the BV 10 as well.
Interested in the beolab 14 2.1 but how do you exactly connect it up to a non b&0 tv????
in General Discussion & Questions · Feb 7, 2014 11:22This is correct. However B&O does not deliver the cable between the BL14 and the device you would like to connect it to. These need to be custom made for your purpose. As far as I understood is correctly, even a speaker …
Interested in the beolab 14 2.1 but how do you exactly connect it up to a non b&0 tv????
in General Discussion & Questions · Feb 7, 2014 11:22This is correct. However B&O does not deliver the cable between the BL14 and the device you would like to connect it to. These need to be custom made for your purpose. As far as I understood is correctly, even a speaker …
Interested in the beolab 14 2.1 but how do you exactly connect it up to a non b&0 tv????
in General Discussion & Questions · Feb 7, 2014 11:22This is correct. However B&O does not deliver the cable between the BL14 and the device you would like to connect it to. These need to be custom made for your purpose. As far as I understood is correctly, even a speaker …
BeoLab 14 & BeoVision 3 Speaker Types
in General Discussion & Questions · Dec 8, 2013 19:51Hello, I just bought a BeoLab 14 4.1 for use with my Beovision 3-32 Mk III. The BV does not know the BeolLab 5 as an speaker type. I have to choose between a BeoLab Penta or BeoLab 1. Anyone have any idea which one I sho…