Posts by jeules0 (archived2)
23 total posts20 results
Beocord 1200 won't play at 9.5
in Imported Content (Unmapped) · May 5, 2016 23:31Yes, that was the problem. The linkage had seized through dry grease. I managed to free it up using switch cleaner and it now works perfectly. Many thanks for the advice, Martin.
Beocord 1200 won't play at 9.5
in Imported Content (Unmapped) · May 5, 2016 22:05Thanks for the quick reply, Martin. I see where you mean and will investigate. It does appear to be sized. Chris
Beocord 1200 won't play at 9.5
in Imported Content (Unmapped) · May 5, 2016 20:02I have just bought a Beocord 1200 reel to reel tape recorder. It is in really nice condition and working but I have a problem in that it runs too fast on playback. It runs at 19 even when 9.5 is selected. I did manage to…
My BS 9000 doesn't react anymore on the remote Beo 4
in General Discussion & Questions · Aug 1, 2014 21:36I have a BS9300 and mine doesn't work at all with the remote. The sensor is the bulge on the front edge, right hand side, below the cd tray. i was going to buy a replacement board on eBay but didn't bother in the end.
H6 Limited Edition 2014
in General Discussion & Questions · Jul 20, 2014 23:06Just bought a pair of blue Pepsi H6 phones for £179 on eBay, and as others have noted the Pepsi logo is very discreet. In fact, to be honest I didn't even realise that was what it was! I'm very pleased with them, especia…
Beogram 4000 tone arm movement
in General Discussion & Questions · Jul 13, 2014 11:08Ok, so it's not the belt. The orange bulb is the neon for the strobe: the bulb chartz is talking about is at the back and not obvious as it's under a black cover. However, you should still be able to see it, assuming it …
Beogram 4000 tone arm movement
in General Discussion & Questions · Jul 13, 2014 09:51As I suggested in my previous thread, have you checked the small belt that drives the arms along the track? If this is worn or slipping, or not aligned properly, the arms will not move across.
Beogram 4000 tone arm movement
in General Discussion & Questions · Jul 12, 2014 22:30No, the cartridge has nothing to do with it. However, do check that the small belt attached to the servo motor is doing its job: it should turn the small wheel slowly which then moves the arms along the track. Check it i…
Beogram 4000 tone arm movement
in General Discussion & Questions · Jul 12, 2014 20:25Sorry, was going to suggest the small belt had come off, but of course it wouldn't move at all then. Remove the cartridge by wiggling it gently side to side while pulling forwards. But be very careful as the connector ca…
Beogram 4000. Replacing tonearm.
in BeoGram · Jul 3, 2014 16:56As Henry Ford said, 'If it ain't bust don't fix it!' Or something like that. i took one look at the wiring as I was going to do a complete swap, but thought, "On second thoughts, I think I'll leave it alone." :-) Chris
Beogram 4000. Replacing tonearm.
in BeoGram · Jul 2, 2014 22:33Hi, so is there actually a problem with the wiring that stops you connecting your 'new' arm to it? Chris
Beogram 4000. Replacing tonearm.
in BeoGram · Jul 2, 2014 16:36Yes, that looks better :-) Have you got it up and running? Chris
Beogram 4000. Replacing tonearm.
in BeoGram · Jul 1, 2014 21:02Very pleased with the new cantilever and Shibata retip on my MMC4000 by Axel Shuerholz in Germany. Posted it off from the UK and it was back in just over 2 weeks: excellent service! The nightmare began when I snapped the…
Beogram 4000. Replacing tonearm.
in BeoGram · Jul 1, 2014 21:02Very pleased with the new cantilever and Shibata retip on my MMC4000 by Axel Shuerholz in Germany. Posted it off from the UK and it was back in just over 2 weeks: excellent service! The nightmare began when I snapped the…
Beogram 4000. Replacing tonearm.
in BeoGram · Jul 1, 2014 17:28[quote user="jeules0"] Had the same problem with my Beogram 4000 tonearm as documented here http://archivedforum2.beoworld.org/forums/t/11046.aspx My replacement arm came from another 4000 but was still different. My ada…
Beogram 4000. Replacing tonearm.
in BeoGram · Jul 1, 2014 17:17Had the same problem with my Beogram 4000 tonearm as documented here http://archivedforum2.beoworld.org/forums/t/11046.aspx My replacement arm came from another 4000 but was still different. My adaptation is working well…
MMC2 Base Came Off
in BeoGram · May 22, 2014 22:56Axel has just repaired my MMC 400 with a new cantilever and Shibata tip. Turnaround was less than 3 weeks from me posting it to getting it back, but that was from UK to Germany, and as both EU countries, no customs hold …
MMC4000 re-built then drama fitting it.
in BeoGram · May 22, 2014 19:55Very pleased with the new cantilever and Shibata retip on my MMC4000 by Axel Shuerholz in Germany. Posted it off from the UK and it was back in just over 2 weeks: excellent service! The nightmare began when I snapped the…
Beogram 4004 Slow Tone Arm Tracking
in BeoGram · Apr 24, 2014 22:48Hi, try this link http://www.taxafinn.dk/beogramrepair.htm The problem you have is caused by the solenoids sticking. Regards Chris
HOW TO REPAIR TO BEOGRAM 4000 SERIES LID
in BeoGram · Apr 12, 2014 18:40Having just bought a Beogram 4000 with a broken lid where it fixes to the hinge, I have just executed what to me is a very acceptable repair. Firstly, I bought a metre of aluminium strip, 20mm wide x 2mm from B&Q (here i…