Beogram 4002 ( type 5523 ) Problems

in Imported Content (Unmapped) · Jun 20, 2012 01:01 GMT

Martin, I discovered the the tracking photo resistor bulb OIL2 had a broken lead. Would the open circuit from the broken bulb cause the detector circuit to be inoperative ?. I'm going to replace the bulb with an LED as d…

Beogram 4002 ( type 5523 ) Problems

in Imported Content (Unmapped) · Jun 19, 2012 01:49 GMT

Do you have any schematics or diagrams of the type 5523 control board so I can find the points to monitor the output of the opto sensor and locate the parts involved in the detector system. The type 5513 Manual which als…

Beogram 4002 ( type 5523 ) Problems

in Imported Content (Unmapped) · Jun 18, 2012 19:10 GMT

I just obtained a 4002 ( Type 5523 ). It has three problems. 1).When I press start,the platter starts spinning at 33 RPM and the arm travels all the way to the left with the speed changing to 45 RPM at the correct time. …

Beogram 4002 Tonearm

in Imported Content (Unmapped) · Jun 18, 2012 03:19 GMT

I also just obtained a 4002 ( Type 5523 ). It has three problems. When I press start,the platter starts spinning at 33 RPM and the arm travels all the way to the left with the speed changing to 45 RPM at the correct time…