Posts by bldufour (archived2)
20 total posts15 results
Limited remote control range (less than 1m) on Beomaster 5500
in Imported Content (Unmapped) · May 7, 2014 13:59I certainly understand. Hope you are well.
Limited remote control range (less than 1m) on Beomaster 5500
in Imported Content (Unmapped) · May 7, 2014 00:28Hi Jacques, I am not sure which cap you are referring to. I replaced all three aluminum axial caps on the IR board. I did not replace any of the flat disc capacitors of which there appears to be one on the back of the IR…
Limited remote control range (less than 1m) on Beomaster 5500
in Imported Content (Unmapped) · May 5, 2014 02:16I have a Beomaster 5500 with very limited range for the remote. About .66m. I have replaced all aluminum caps on every board, including IR board. I have replace the IR sensor. I re-soldered all connections on IR board. I…
I hate to be a bother, but my Beocenter 9300 cd will not spin at all and I have spent hours searching the forum.
in Imported Content (Unmapped) · Apr 4, 2014 15:38Hi Derek, I got a tip from somewhere else and used a brass brush on my Dremel to remove the varnish and leave a nicely polished surface. Of course have to be careful not to go through the trace. All that said, repair is …
I hate to be a bother, but my Beocenter 9300 cd will not spin at all and I have spent hours searching the forum.
in Imported Content (Unmapped) · Apr 3, 2014 04:03Thanks for the tips Derek. Considering it is only a 2-sided board, it should not be too bad. I will get it glued together and attempt the trace repair this weekend. I appreciate the advice. Brian
I hate to be a bother, but my Beocenter 9300 cd will not spin at all and I have spent hours searching the forum.
in Imported Content (Unmapped) · Apr 1, 2014 03:30Well, the saga continues. I went over the unit with a flashlight and magnifying glass looking for any problems. When I got around to the back of the unit, lo and behold, I found that there was a crack in PCB64 in the upp…
I hate to be a bother, but my Beocenter 9300 cd will not spin at all and I have spent hours searching the forum.
in Imported Content (Unmapped) · Mar 31, 2014 14:29I would like to test the functionality of the cd drive motor. I have obviously found the leads to the motor, but anyone have an idea as to the maximum allowable voltage I should use so as not to damage the motor? Thanks,…
I hate to be a bother, but my Beocenter 9300 cd will not spin at all and I have spent hours searching the forum.
in Imported Content (Unmapped) · Mar 30, 2014 22:50Thanks for the clarification on the C2103. I was going crazy looking for it. Laser lens does move freely up and down. Brian
No CD spindle motor activity on Beocenter 9300
in Imported Content (Unmapped) · Mar 30, 2014 21:25Hello. I have a 9300 with same problem it seems. A question though. When replacing the laser, does any other sort of adjustment need to be made that requires specialized equipment? There are still lasers available from t…
I hate to be a bother, but my Beocenter 9300 cd will not spin at all and I have spent hours searching the forum.
in Imported Content (Unmapped) · Mar 30, 2014 21:17Oh, my bad. Thanks Graham. Looked at so many posts, I forgot what I had. My post has been corrected.
I hate to be a bother, but my Beocenter 9300 cd will not spin at all and I have spent hours searching the forum.
in Imported Content (Unmapped) · Mar 30, 2014 21:05I have a Beocenter9300. I acquired it a few years ago and it worked fine. No longer needed, so I sold. Packed extremely well, but when person got it, said cd did not work. He returned and after 2 yrs, I pulled it out aga…
Beomaster 7000 will not respond to remote
in Imported Content (Unmapped) · May 20, 2012 02:31I have a Beomaster 7000 that will simply not respond to the remote. It will not turn on or off or switch sources. I have tried a working Beo4 and 3 working Beolink 1000's. I know they work because they control my AV7000 …
Problem with CD7000 - Will not spin disc, servo capacitors have been replaced
in Imported Content (Unmapped) · May 20, 2012 02:19Well, here I go again. I have a cd7000 that I had not tested. Went to use it and the usual track seeking start and stop nonsense. I replaced all the capacitors as suggested by Martin and had previously done on my cd 5500…
I did a dumb thing with my Beocord 5500
in General Discussion & Questions · Apr 5, 2012 04:23Hey Martin - Thanks for the info. I am not totally sure about the tape speed, but when I listen to something with both voice and music (Peter and the wolf is the only cassette I have available) the instrumentation sounds…
I did a dumb thing with my Beocord 5500
in General Discussion & Questions · Apr 4, 2012 17:43I am embarrassed to admit this, but here goes. While replacing belts on my Beocord 5500, I forgot to unplug the unit and it was in standby. I touched the metal frame of the drive mechanism against the top circuit board w…