Posts by falstaff (archived)
8 total posts7 results
Dead Beocenter 9000
in Imported Content (Unmapped) · Apr 20, 2011 05:11Spoke to the closest B&O agent, and as you predicted, he told me that it would likely be uneconomical to repair, so I might try and find Nobby and have a word with him. Thanks for the suggestion. Peter
Dead Beocenter 9000
in Imported Content (Unmapped) · Apr 18, 2011 05:59Yes, this is the way I'm thinking now...all the easy/obvious possibilities exhausted. I'm in Salisbury, and I gather there is a B&O dealer in Wimborne, not too far away, so I will probably run it down to him. Regards and…
Dead Beocenter 9000
in Imported Content (Unmapped) · Apr 17, 2011 16:03Sadly my equipment extends to a multimeter and soldering irons, and no schematic. What you say about the cpu, rings a bell. Many many years ago, a new fangled microwave I had had for a couple of years just died. We took …
Dead Beocenter 9000
in Imported Content (Unmapped) · Apr 16, 2011 12:47Hi, and thankyou for your suggestion. When you say resoldering.....you mean generally, board by board, or just the cpu? If the latter, where does it live, and am I likely to do it any harm by heating it up? Regards Peter
Dead Beocenter 9000
in Imported Content (Unmapped) · Apr 16, 2011 12:41Well, I removed and resoldered the power PCB and also the mains input/fuse PCB, but sadly, there is no change. I begin to feel that it is either a solder problem....and what a lot of soldering there is in a 9000, or mayb…
Dead Beocenter 9000
in Imported Content (Unmapped) · Apr 14, 2011 05:52Hi, and thanks for the input I will pull that board out and go over it in the next day or two I'll let you know how it goes. Cheers Peter [quote user="Blackrix"] Try to resolder the power PCB, which is located behind the…
Dead Beocenter 9000
in Imported Content (Unmapped) · Apr 11, 2011 09:34Hi, my beloved Beocenter 9000 suddenly died on me. It is a beautiful piece of kit, which I will probably keep for it's aesthetic value alone..but naturally, I would prefer that it worked, so I wonder, does anyone out the…