Posts by Dmitry83 (archived)
42 total posts35 results
Low output - left channel on 5005
in BeoGram · Jul 29, 2010 07:16Had everyone found out on such issue? I have the same situation with Beogram 5005 with MMC2. Is that a cartridge fault?
Beogram 5005/5500 LP- is the tonearm start position adjustable?
in General Discussion & Questions · Jul 23, 2010 06:18Dear Graham, Thank you very much for the explanations! Today I've opened the "trunk" easily (then it is necessary to move the tonearm back to the right side from the center to reach the Eccentric "E"). Then I turned the …
Beogram 5005/5500 LP- is the tonearm start position adjustable?
in General Discussion & Questions · Jul 22, 2010 07:28People are still driving LADA in this country! So hope, that keeped our @$$e$ away from our hands!;-) Thank a lot for the detailed advise: I've noted that ingenious "trunk" fixing at the bottom, when only received the Be…
Is it possible to switch on PHONO with Beo4 on BM5500?
in General Discussion & Questions · Jul 22, 2010 07:22Thanks a lot for a detailed advise- I've added the N.RADIO button, and now works perfectly!
Beogram 5005/5500 LP- is the tonearm start position adjustable?
in General Discussion & Questions · Jul 21, 2010 10:24Could not find that eccentric, provided by picture in the Service Manual. Could someone explain, where should I look? Seems it is somewhere at the right- near the tonearm. Is it reachable if I remove the metal disc and t…
Beogram 5005/5500 LP- is the tonearm start position adjustable?
in General Discussion & Questions · Jul 20, 2010 08:47OK- I see it on the picture. There is an Eccentric disc (marked with "E"), and the directions are mentioned "IN" (counter-clockwise) and "OUT" (clockwise). Will reach the Beogram tonight, and will check out alive. Will r…
Beogram 5005/5500 LP- is the tonearm start position adjustable?
in General Discussion & Questions · Jul 20, 2010 07:56Now I see there the Eccentric Disc "E", but cannot understand, where is it located- is it under the outer metal disc, covering the mechanism, or under the back panel, hiding the lid opening hooks?
Beogram 5005/5500 LP- is the tonearm start position adjustable?
in General Discussion & Questions · Jul 20, 2010 07:23Found the Service Manual. Is it the Pickup Parallelism, that can adjust it?
Beogram 5005/5500 LP- is the tonearm start position adjustable?
in General Discussion & Questions · Jul 20, 2010 07:15Hi, everyone! Faced the following trouble: when starting the vinyls with the wide empty edge (when the lead-in groove is 2-3 mm from the edge), the head slips off the vinyl, and falls down! Is the starting point adjustab…
Is it possible to switch on PHONO with Beo4 on BM5500?
in General Discussion & Questions · Jul 20, 2010 07:08Stefan, Thank you very much for your great help! Will try to do that tonight, and will report. BR Dmitry
Is it possible to switch on PHONO with Beo4 on BM5500?
in General Discussion & Questions · Jul 20, 2010 06:51Thanks, Stefan! There is no separate PHONO button- should I program the N.RADIO for it somehow? Thanks!
Is it possible to switch on PHONO with Beo4 on BM5500?
in General Discussion & Questions · Jul 20, 2010 05:50Hello, everyone! I've bought the nice Beogram 5005 LP from Spiros (specal thanks for the good packaging!) Is it possible to use Beo4 remote to switch the BM5500 to PHONO? Now I have to use the old Beolink 1000 for it, wh…
Can the CD6500 be controlled via BM5500?
in General Discussion & Questions · May 31, 2010 10:04It turned out, this CD6500 is WITHOUT the RCA- only DIN! On my BM5500 and CD50 I've made the controls via DIN and sound- through RCA, which gives freedom to use any RCA cable to adjust sound to the speakers and room. Are…
Can the CD6500 be controlled via BM5500?
in General Discussion & Questions · May 31, 2010 05:21Hi, everyone! Just found the white (unfortunatelly) CD6500 on sale, and curious, if it will be controlled via my Beomaster 5500? Is the CD6500 the same CD5500 with additional functions? Thanks!
How to turn off LOUDNESS on Beomaster 5500?
in General Discussion & Questions · May 26, 2010 12:26[quote user="tournedos"] [quote user="evman140"] Is there anyone who prefers LOUDN on? [/quote] Me with some of the vintage kit. It works for the purpose it was designed to, which is to compensate for the properties of t…
How to turn off LOUDNESS on Beomaster 5500?
in General Discussion & Questions · May 26, 2010 05:07BUSTED!!!🙂 The LOUDNESS can be turned off with Beo4: 1) Press LIST until A.SETUP appears, and press Go; 2) Press LIST until LOUDNSS appears, and press GO to switch it on or off; 3) Press LIST until S.STORE appears, and …
How to turn off LOUDNESS on Beomaster 5500?
in General Discussion & Questions · May 25, 2010 07:13Have found all instructions for all units- hang on, Beomaster- it's BeoBuster coming!😜
How to turn off LOUDNESS on Beomaster 5500?
in General Discussion & Questions · May 25, 2010 06:32[quote user="tournedos"] I'm not with my BM5500 now so can't verify, but it should be possible with Beo4... Use LIST until you see A.SETUP, then GO LIST to LOUDNSS, then each press of GO should toggle loudness on/off LIS…
How to turn off LOUDNESS on Beomaster 5500?
in General Discussion & Questions · May 25, 2010 06:30[quote user="Dillen"] How about Shift-Sound ? Martin [/quote] On BL1000 nothing happens this way.
How to turn off LOUDNESS on Beomaster 5500?
in General Discussion & Questions · May 25, 2010 05:58Taken a Beo4 from a friend- is it possible to do something with that stubborn LOUDNESS with it? He also has a Beo5, which I also can lend for a couple of days. PS How does that backup battery looks? I'm ready to pick it …