Posts by johansens (archived)
13 total posts12 results
Lack of bass in Beovox mc120.2
in Imported Content (Unmapped) · Nov 8, 2009 09:13Again, thanks for all the feedback! I will check out these points and see if that could help to improve the performance!
Lack of bass in Beovox mc120.2
in Imported Content (Unmapped) · Nov 2, 2009 17:57Ok, I've been listening to a wide range of speakers over the past years, and my personal perception says that they should have som more bass, especially for their size. I can mention that with "loudness"-effects turned o…
Lack of bass in Beovox mc120.2
in Imported Content (Unmapped) · Nov 2, 2009 15:12Does anyone know if this looks like a broken resistor? Both speakers are playing bass in the accurate same way. Those with similar speakers out there, are yours a bit lean in the bass-tones?
Lack of bass in Beovox mc120.2
in Imported Content (Unmapped) · Nov 2, 2009 11:06Woofers are now refoamed and installed properly in the speakers. Tested them today and the lack of bass is still prominent. Looks like the drivers did not affect the result. I have to set bass-settings to max to aquire a…
Lack of bass in Beovox mc120.2
in Imported Content (Unmapped) · Oct 8, 2009 18:17I understand your choice of solution, especially because the burned voice-coil. Your result do look (and probably sound) very delicate. I also consider to do this job myself, in an amature way, just ordering what i need …
Lack of bass in Beovox mc120.2
in Imported Content (Unmapped) · Oct 8, 2009 17:56The thought has crossed my mind, but I'm keen on fixing the original ones since the voice coil seems to be ok on both. Peerless drivers are also a bit expensive, those cost around 100 euro here i norway (for one). I'm on…
Lack of bass in Beovox mc120.2
in Imported Content (Unmapped) · Oct 8, 2009 16:42Thanks for all feedback! Unbelievable, cabinets are still like new. Jandyt, your thread was exciting to read! I'm considering doing this job myself, mostly because I'm on low budget, but also because it had been fun to r…
Lack of bass in Beovox mc120.2
in Imported Content (Unmapped) · Oct 8, 2009 14:31I suspect the cheap drivers to be unsuitable for the job and therefore sound weak, but I expect somewhat difference in volume compared to the original ones. To me, nothing seems to be damaged on the crossovers. Overload …
Lack of bass in Beovox mc120.2
in Imported Content (Unmapped) · Oct 8, 2009 08:41Ok. The bass drivers do move, and it increases with the volume. Problem is that mid/treble are very dominant compared to the bass. Both type of bassdrivers are acting the same way. I have to set bass-settings to max on a…
Lack of bass in Beovox mc120.2
in Imported Content (Unmapped) · Oct 8, 2009 06:17Even if the foam are rotten on the original drivers, and even if i try other 8-inch drivers in the speakers, there should be some amount of bass. I wonder if the crossovers are faulty. Anyone who has experienced somethin…
Lack of bass in Beovox mc120.2
in Imported Content (Unmapped) · Oct 8, 2009 06:05That was what i thought too, my plan is to refoam the originals. Do you know where i can find such a set for re-foaming and the capacitors i need? Looking forward to test them!
Lack of bass in Beovox mc120.2
in Imported Content (Unmapped) · Oct 7, 2009 18:36Hi I'm new to this forum. I got a pair of white Beovox mc120.2's, and there is a huge lack of bass in both speakers. The original drivers have been replaced with cheap 8 inch woofers (ohm), but i also got the original on…