CD servo board problem

in The Workbench · Mar 14, 2009 14:49 GMT

Thank you for your help, I will get to work :)

CD servo board problem

in The Workbench · Mar 14, 2009 10:02 GMT

I dont think it has do with the focus offset. Today I took a look at the Beocenter again and I messured the current to the cd motor. -7,4V, which means that the cd spins the wrong way?😕 Am I on to anything now?:)

Beocenter 8000 cd-problem

in The Workbench · Feb 27, 2009 17:42 GMT

I am working at home, but I have opportunity to do more advanced mesuring and component checks elsewhere. I found that two 10ohms resistors where out of specs, one of them was blown(burned). After reading around on this …

Beocenter 8000 cd-problem

in The Workbench · Feb 18, 2009 06:01 GMT

Anybody? :)

Beocenter 8000 cd-problem

in The Workbench · Feb 10, 2009 04:17 GMT

That is probably the best thing to do, but I like to try doing it myself. This is a hobby of mine. So if anybody has any suggestions about what to check out next, I am very happy for every answer...

Beocenter 8000 cd-problem

in The Workbench · Feb 9, 2009 13:54 GMT

I hava a beocenter 8000 with a non-working cd-player. After a look around the forum I changed a couple of resistors and a transistor that messured out of range. Now the CD spins up and keeps spining at a speed near light…

CD servo board problem

in The Workbench · Feb 9, 2009 13:50 GMT

I have a Beocenter 8000 with the same problem. Changed both resistors and a transistor that messured out of range. Now the CD spins up and keeps spining at a speed near light:), after 3-4seconds the lid opens. Before doi…