DA
Posts by david.jones
8 total posts

5 results

Beocenter 7007 - where to buy amp trimmer pots?
in BeoCenter · Mar 6, 2025 13:16 GMT

Hi all, both need replacing but I am unable to find specifications and where to buy replacements. Any help most appreciated and thanks in advance, David

Beocenter 7007 - adjust amp voltage trimmer resistors
in BeoCenter · Feb 25, 2025 14:03 GMT

Hi Filip, I now have another Beocenter 7007 with a similar problem and I wish to change the trimpots you mentioned above. I can't find the specs for these. Could you advise where I might purchase these please? Thanks in …

Beocenter 7007 - tape issue
in BeoCenter · Feb 19, 2025 14:37 GMT

Hi all, When I press play, both spools turn, but after about a second the right-hand one stops. This was referred to in responses by Martin and Nick (2019) in https://archivedforum2.beoworld.org/forums/p/38090/289608.asp…

Beocenter 7007 - adjust amp voltage trimmer resistors
in BeoCenter · Jan 21, 2025 16:11 GMT

Filip, many thanks for this, very helpful, all working now. I would not have known where the resistors were for meter probe placement. I hope this will help others as apparently this is quite a common fault. Regards, Nic…

Beocenter 7007 - adjust amp voltage trimmer resistors
in BeoCenter · Jan 20, 2025 16:53 GMT

Hi, When playing a record and the volume is turned up to about 3.6, the arm lifts off and the unit shuts down. I've been told that the idle current trimmers may need adjusting to give 10mV. I assume these are the parts a…