BeoLab 8000: dead / no red LED, measurements attached

in BeoLab · Feb 7, 2024 01:13 GMT

I figured it out. Here, for future documentation: T2 tried to escape the hotglue by lifting itself off the PCB, which caused (almost) all the tiny wires to rip off from the coil to the legs. I desoldered T2 and opened it…

BeoLab 8000: dead / no red LED, measurements attached

in BeoLab · Feb 4, 2024 18:32 GMT

I also got a pair of BL8000 with no signs of life (no light, no relay click). Really hoped for some busted traces because of foam rot, but continuity looks fine. On T2 I measured 230V, but no 44V or 22V. Instead I got 10…

Avant NG LCD Panel

in BeoVision · Jan 15, 2024 15:59 GMT

Thank you for the info. Sadly I couldn’t find any other TV which also uses this exact panel. The Philips 55PUS8809 seems to have a LTA550FJ01. Maybe they are intercompatible ?

Avant NG LCD Panel

in BeoVision · Jan 10, 2024 10:01 GMT

Hi there, I read that the Avant non-NG uses a Samsung LTA550FJ01 LCD panel. But which ones does the NG use? And if you replace a panel, is it a simple matter of plugging in a new one, or does there some sort of programmi…