Beoplay V1 not turning on

in BeoPlay · Mar 31, 2024 18:51 GMT

I think it was this part I highlighted in red square. I have to take the black cover off to see for sure if it is only this component. Fair, I’ll buy it and see how it goes. It’s the easier way to find out the origin of …

Beoplay V1 not turning on

in BeoPlay · Mar 31, 2024 17:24 GMT

The pin position was correct but then I tried with the mains plugged in and when I touched the pin with the multimeter something on the awareness board blew up. It still shows 5volts but now nothing changes as i screwed …

Beoplay V1 not turning on

in BeoPlay · Mar 31, 2024 02:17 GMT

So I measured it with the multimeter on DC on a screws on the board and on metal parts for ground on that pin number 4 on the P101. and the numbers are most of the time on close to zero it doesn’t seem to react to the re…

Beoplay V1 not turning on

in BeoPlay · Mar 29, 2024 14:17 GMT

alexsalles wrote: Would this issue be on the T-CON board or video engine board ?( even tho it is functioning without image) and the remote not working can be a related or a side effect from the video engine as the IR sen…

Beoplay V1 not turning on

in BeoPlay · Mar 29, 2024 12:57 GMT

Thanks @Madakp for the help. So I connected the ethernet cable to it and I was able to turn it on via the b&o app, but there is no picture, I managed to play the radio and it works fine but all I see is black screen. And…

Beoplay V1 not turning on

in BeoPlay · Mar 28, 2024 17:23 GMT

I had that component replaced and it still doesn't turn on. Ive been studying the service manual and it could be that the "IR Receiver & Room Awareness" ( 58Module 8007282 PCB58) need to be replaced. My light turns green…

Beoplay V1 not turning on

in BeoPlay · Mar 22, 2024 12:33 GMT

I still have to take the video engine board out to see if there is corrosion, from the top it looks fine. I found the capacitor on ebay, https://www.ebay.ie/itm/292412377560 just €8. I will update you guys if that fixes …

Beoplay V1 not turning on

in BeoPlay · Mar 21, 2024 15:43 GMT

I took them apart they seem like batteries, I wonder which kind, any ideas?

Beoplay V1 not turning on

in BeoPlay · Mar 21, 2024 14:45 GMT

Im having the same issue with my V1. I noticed there are some voltage written on black thin plastic label around it. and suddenly that come apart and they look like two batteries. I tried to remove the soldering that was…

DIY Beolab 8000 Wood frets (STLs included).

in BeoLab · Dec 30, 2023 22:21 GMT

I did mine, got the wood the way I wanted but the clamps I got 3D printed locally and I wasn’t aware 3D printer can vary printing quality so much. Mine did not clipped well and most didn’t clip on the clamp at all, I had…