Different sound levels from two BL5’s?

in BeoLab · Jan 10, 2024 16:43 GMT

I only use the Beo4 to activate/deactivate the speakers. The speakers default volume is set so I only use the Lyngdorf to control the volume. I used the analog out on the Lyngdorf to the line in on the speakers as I beli…

Different sound levels from two BL5’s?

in BeoLab · Jan 10, 2024 16:32 GMT

Thank you for the tip, however, I bought the sync cable from the official B&O retailer in Stockholm, so I assume it is original and not causing any issue :)

Different sound levels from two BL5’s?

in BeoLab · Jan 10, 2024 09:01 GMT

Hi, I bought a pair of BL5’s which turned out to be faulty; one speaker did not work at all. Got it fixed by an expensive chassis replacement. But now, when both speaker are ”working”, I experience that the other speaker…

Beolab 5 - Adaptive Bass Calibration can’t complete

in BeoLab · Jan 10, 2024 07:58 GMT

I had the same problem on one of my BL5’s, i.e. the room correction initiated with mic coming out but then nothing more happened, just remained quite. However, the speaker did not seem to work at all, no sound when playi…

Beolab 5 flashing red

in BeoLab · Nov 30, 2023 08:03 GMT

Frog wrote: I haven’t calibrated them for quite some time as the room shape nd contents haven’t changed, and am loathe to do so as I hear there is a finite amount of times you can do this. Say what? Is this really the ca…

Beolab 5 defect?

in BeoLab · Sept 14, 2023 20:56 GMT

I’ve set it to L-opt 1 (led flashed to confirm) but no sound (or vibrations) what so ever from one speaker, not when playing music or performing calibration. Just dead silence… ?

Beolab 5 defect?

in BeoLab · Sept 14, 2023 14:43 GMT

Yes, have brand new RCA-cables and B&O sync cable installed. Have switched the cables between the speakers and between the line out on the preamp without success. Also with/without sync cable. But problem remains, one sp…

Beolab 5 defect?

in BeoLab · Sept 14, 2023 01:13 GMT

Hi Recently bought pair of Beolab 5’s. Connecting them via Line (RCA) from pre-amp and have sync cable installed. When starting music only one speaker plays. When initiating bass/room measurement on the silent speaker, m…

Streamer for Beolab 5

in BeoLab · Sept 9, 2023 21:48 GMT

Thanks for the replies! I will connect the BL5 from RCA line out (not speaker connections!) with variable level and not set to full range (max volume). Will give it all a try and let you know of the results. Question 1: …

Streamer for Beolab 5

in BeoLab · Sept 7, 2023 17:40 GMT

Hi, Just bought a pair of Beolab 5 based on the looks! Realize I should have read about all volume control issues first… My plan was to connect from analog line out on my Lyngdorf TDAI-1120 to analog line in on the BL5’s…