Posts by Muzzwell
15 total posts12 results
Beogram CDX, CDX2, CD3300 left hinge reproduction part now avaiable
in BeoGram · Dec 25, 2022 18:55I am very grateful for his efforts and this community. I have been searching for this part for about 5 years. I just wanted to make sure all those whom have had to do a fix would get updated that they can now replace wit…
Beogram CDX, CDX2, CD3300 left hinge reproduction part now avaiable
in BeoGram · Dec 25, 2022 17:27Last time a corresponded with beoparts these were in the pipeline. There is an old archived post here on going to huge lengths the repair this part. So I don't get why you are refering to this as if I was just sharing be…
Beogram CDX, CDX2, CD3300 left hinge reproduction part now avaiable
in BeoGram · Dec 25, 2022 04:07There is a company in Denmark, Beoparts that have now made available a professional reproduction left hinge for CDX, CDX2, CD3300. I have been told by beoparts that this part is not printed but injection molded and that …
Beogram CDX CDX2 CD 3300 gear for lid broken
in Imported Content (Unmapped) · Aug 28, 2019 20:14Would you be prepared to share the file or print and supply the part at a charge of course. I am pretty stuck and have been searching but no luck.
Beogram dustcover enhancement
in Imported Content (Unmapped) · Jul 6, 2019 19:06Hi Jeff, I am hoping you can advise. I did post this question previously in the beogram forum, but as of yet no response. It is regarding a CDX. I am looking to polish the acrylic dustcover. In the service manual there i…
CDX DUST COVER REMOVAL
in BeoGram · Jun 9, 2019 16:26Hallo, I am hoping someone can advise. I want to remove the dust cover from a CDX in order to polish the acrylic panel. The service manual isn't very clear. (screen grab attached). The black plastic mated with the alu pa…
Can anyone identify this device, was in a box with two MMC 10E-C cartridges
in BeoGram · Sept 23, 2017 23:24Might well be. Those Decca enthusiasts need deep pockets,. Hopefully there is a Japanese gentleman that has a collection of mono heads after one. That site is expensive though. Always get that popping up when searching f…
Can anyone identify this device, was in a box with two MMC 10E-C cartridges
in BeoGram · Sept 23, 2017 23:19Might well be, the Decca enthusiasts are seriously advanced at modding stuff. Hopefully a Japanese gentleman that likes mono is looking for one. That German site is expensive though. Or maybe the rest of us are too cheap…
Can anyone identify this device, was in a box with two MMC 10E-C cartridges
in BeoGram · Sept 23, 2017 19:36Got a result, I did contact the previous owner. He had it in his attic for 35 years and never used it or knew what it was. Someone on the vinyl engine suggested a SME adapter for B&O, further searching revealed SME produ…
Can anyone identify this device, was in a box with two MMC 10E-C cartridges
in BeoGram · Sept 23, 2017 11:44It might not be B&O, I was just looking again at the quality of the 4 pins at the bayonet end, they look quite basic. As for whats inside, no idea, it is sealed, has the weight/size ratio of a cartridge. I posted the que…
Can anyone identify this device, was in a box with two MMC 10E-C cartridges
in BeoGram · Sept 22, 2017 22:11The photo is cropped so here is the other end.
Can anyone identify this device, was in a box with two MMC 10E-C cartridges
in BeoGram · Sept 22, 2017 22:09Hello, I was hoping someone can identify this please. It came with two MMC 10E-C cartridges and some other bits included in a purchase of an amplifier. The bayonet end is logical, but the length and the three contacts an…