Horizon 48 start problem

in BeoVision · Jun 20, 2026 08:02 GMT

Bought a Horizon who would start and stop after some time and after reset bij taking off the mains power again would work for a while . But at home just a green light and nothing else happening . So looking for the reset…

Beosound 9000 MK2 problem

in North America · Aug 1, 2022 08:12 GMT

I share your opinion and totally cured about this 6 cd wonder . So not for me

Beosound 9000 MK2 problem

in North America · Jun 20, 2022 16:41 GMT

My are getting totally crazy about Beosound 9000 and played perfectly all afternoon and after putting it standby so the same non function cd and lid again . So must be somewhere else but I.am done with this kind off equi…

Beosound 9000 MK2 problem

in North America · Jun 20, 2022 09:21 GMT

The lid sometimes works but then the voltage is around 9 volts on the motor (slow working was below 7 volts measured. But I have just been re soldering the Motor Control unit at the parts on the cooling plate mounted . A…

Beosound 9000 MK2 problem

in North America · Jun 18, 2022 04:40 GMT

Just bought it from the first owner but untested from the wall . Sometimes it works okay but mostly not . The problem comes with the Lid not lifting the glass good enough and the cd player reaction is also bad . Been mea…

Beovision 7-40 mk3 reageert niet op beo4 bij het menu

in Imported Content (Unmapped) · Sept 6, 2021 08:00 GMT

Is gelukt en kwam erin en daarna na niets veranderd te hebben werkt die weer dus ergens software foutje denk ik ? Geen idee maar bedankt voor de tip 😁

Beovision 7-40 mk3 reageert niet op beo4 bij het menu

in Imported Content (Unmapped) · Sept 5, 2021 18:49 GMT

Ineens kan ik niet mijn menu bedienen met mijn beo4 remote ? Staat er op in het beeld en kan dus niet van positie veranderen met mijn joystick beo4 en mijn andere met navigatie knop . Onbegrijpelijk en heb de dus de tv v…

Welk cd loopwerk zit in de Beosound 3000 MK2 ?

in Imported Content (Unmapped) · May 26, 2021 17:01 GMT

Heb Beosound 3000 MK2 en vraag mij af welk type loopwerk gebruikt wordt ? Dus wie weet het ?

Beolab 8000 MK1

in Imported Content (Unmapped) · Apr 9, 2021 08:17 GMT

Problem solved and TR11 was the problem . Beolab in working order again 🙂

Beolab 8000 MK1

in Imported Content (Unmapped) · Apr 2, 2021 08:37 GMT

Changed the foam and repaired the power board after the old foam damaged the printed circuit . But is not getting from stand-by anymore so only the red led burning and the relay is not coming in . Switched the power-boar…