Posts by svet
27 total posts22 results
Beorgram cd 7000 problem
in BeoGram · Jun 23, 2023 06:50My Beogram cd 7000 still doesn’t read cds after recapping the servo board. I am inclined to replace the laser unit but have the following question. The player is fitted with a cdm-4/56 but I can source a second hand cdm-…
Beorgram cd 7000 problem
in BeoGram · Jun 21, 2023 11:49Yes sure. Here it is. I checked the soldering today and turned around the red cap supplied by Beoparts. The player started OK but when I moved it to the amp it did not read the cd anymore.
Beorgram cd 7000 problem
in BeoGram · Jun 20, 2023 08:16Hi All! I am continuing to have issues with my Beogram cd7000 and have replaced all 6 capacitors from Beoparts. The player have played 1 cd and have switched off, and now it does not read any cds. It shows the same behav…
Beorgram cd 7000 problem
in BeoGram · Jun 2, 2023 08:29Hi Martin. It is a Nichikon 47u. Can the reason be other then that?
Beorgram cd 7000 problem
in BeoGram · Jun 1, 2023 03:12Hi All, My Beogram cd 7000 has stopped working. After pressing the Play button the Track sign light up, the disc spins but it fails to read the tracks and it goes off. When the problem appeared I noticed that that after …
B&O Century CD problem
in BeoSound · Jun 30, 2022 22:41Re: CD issue. I intend changing the caps. Do you know if the caps controlling the laser are situated on the laser mechanism? Re: Radio issue. The caps of the power supply seem an easy option. Are these the main caps for …
B&O Century CD problem
in BeoSound · Jun 29, 2022 18:27I wanted to check the caps first to be sure the problem is there but understand that they need to be disconnected from the board first? If the problem is 100% caps then indeed makes sense changing them all. Another probl…
B&O Century CD problem
in BeoSound · Jun 28, 2022 16:36Thank you for your comment. Do you think i can check the caps on the circuit? Do you think these are the caps on the laser cdm or on the cd circuit?
B&O Century CD problem
in BeoSound · Jun 28, 2022 09:28Hi there. My Century played only two cds after replacing the laser with a new one. Now it spins the disc for a second before the door opens. The test error code is 3 (radial error) Can someone explain what this error mea…
Beosound Century - Radio issue
in BeoSound · Jun 21, 2022 09:58Hi Keith. Are you able to give any further advice on the next step. I am not sure on how to use the table and on the next steps. Thank you!
Beosound Century - Radio issue
in BeoSound · Jun 17, 2022 15:47Thank you Keith! Have entered into test mode and got a "1". Have also downloaded the service manual but not sure what to do next. Is it a question of testing the different elements with a voltmeter? Is there a way of res…
Beosound Century - Radio issue
in BeoSound · Jun 17, 2022 13:39The label is partially damaged bit i agree it is a European model hence only theFM socket and the Mode button does not livht up. However the problem still remains that I can't switch it back to FM. It goes 522-1611 (MW) …
Beosound Century - Radio issue
in BeoSound · Jun 16, 2022 21:10Thank you very much for the prompt reply. I could not find the 3 digit number but the serial number is 2457516 and I am pretty sure the system is imported from Danmark. Any suggestions?
Beosound Century - Radio issue
in BeoSound · Jun 16, 2022 08:11Hi All. I would be grateful to receive advise on how to fix a radio issue I am having on a new to me Century 1997. While memorising some FM stations the radio seems to have switched to MW Band (522 - 1610 kHz) and I am u…
Beocord 7000 change of drive belt
in BeoCord · Jun 1, 2022 07:13Hi All. I need to replace the drive belt in my Beocord 7000 but was unable to find information on how to fit the belt around the wheels. Grateful if could receive a diagram or picture of how the belt goes around the whee…
Beomaster 2000 (2911)
in Imported Content (Unmapped) · Dec 28, 2021 11:37Thanks Martin. There is no sound via TP1 (tape) or via TP2 (cd) and then eventually after a while and aome noise the sound comes out. But it can disappear again after 30'. Probably the capacitors in the Beomaster.
Beomaster 2000 (2911)
in Imported Content (Unmapped) · Dec 26, 2021 19:28Thank you Jacques. Good advise for a proper job however I was hoping for an advise of the 2-3 most likely capacitors, which might fix the issue without changing the whole lot? Incidentally I have three other B&O receiver…
Beomaster 2000 (2911)
in Imported Content (Unmapped) · Dec 26, 2021 19:21Thank you Martin. It is the receiver that has failed while I think you refer to the Beocord?