Want a Beomaster 5000 23xx Service Manual

in Wanted · Aug 11, 2026 04:16 GMT

brianlaing wrote: Closed: Want a Beomaster 5000 23xx Service Manual Manual purchased from a seller. Thankss!

Want a Beomaster 5000 23xx Service Manual

in Wanted · Jun 26, 2026 22:08 GMT

Hello all! I’ve downloaded the Beomaster 5000 23xx here (and on other sites) and they are all the same, poorly scanned manual. While that is a good start for the manual (and better than nothing), I thought I’d ask here i…

Beomaster 2000 Type 2913 - Hinge Damping Grease question

in BeoMaster · Nov 29, 2025 20:24 GMT

Hi! I am the original owner of a Beomaster 2000 Type 2913. I have noticed that the lid pops up quickly instead of the slow opening I remember from when it was newer. I understand you can apply hinge damping grease (on or…

Beogram 3000 Type 95xx (Tangential ) - remove aluminum plate from cover

in BeoGram · Sept 4, 2023 07:05 GMT

Hello all, I can't find anything from anyone else who did this. I want to remove the scratched aluminum cover plate from the lid of my Beogram 3000 Type 95XX (tangential). I have a replacement for it but have no idea how…

BeoCenter 9000 troubleshooting

in BeoCenter · May 8, 2023 00:39 GMT

As a follow up, someone had mentioned that maybe a lot of the issues were due to maybe an overload due to an electrical surge. I suspect they were correct! I ended up buying a new (well, from a donor machine) amplifier b…

Beocenter 9000 motors slow

in BeoCenter · Jun 6, 2022 19:12 GMT

Actually the missing resistor wasn't the issue. In the original board the same resistor was removed, so not a coincidence. What ended up being the issue was a loose connector on a capacitor. The trace had lifted from the…

Beocenter 9000 motors slow

in BeoCenter · May 29, 2022 01:12 GMT

Thanks for the tip! I actually decided to locate the parts on the original board (the one that controls the motor speeds correctly but only sound when you turn it up all the way). I noticed a missing resistor! So, tomorr…

Beocenter 9000 motors slow

in BeoCenter · May 28, 2022 11:07 GMT

Hello all! I got a donor amplifier / power board from Denmark to replace the faulty on I have in the US. I now have regular audio but have noticed that while the CD player works fine, the doors and the cassette are slow.…

BeoCenter 9000 troubleshooting

in BeoCenter · May 3, 2022 19:00 GMT

Thanks Mark-sf! I'll do some digging online how to check the power supply voltages. I don't have any experience with doing that and only have a multi-meter.

BeoCenter 9000 troubleshooting

in BeoCenter · May 3, 2022 18:59 GMT

Hello Guy! I actually replaced the mute relay (and forgot to mention it) with a new one. It wasn't working properly when I first got the BeoCenter. The volume is low on both the sets of speaker sockets BUT when I select …

Beocenter 9500

in BeoCenter · May 2, 2022 22:15 GMT

Hi! I would like to know if there are any replacement feet available, too. The feet available on Martin's site don't include the Beocenter 9000 series (9000, 9500(. In the Service manual, they are listed on page 3-1 as i…

BeoCenter 9000 troubleshooting

in BeoCenter · May 2, 2022 10:32 GMT

Hello all! I had gotten a "repair" BeoCenter 9000 on ebay a few months ago. I've been able to fix the following: Doors open/close - ordered new belts and replaced. Lubricated the channels where the doors slide. Both are …

Beogram 8000 sensor lamp

in BeoGram · Jan 4, 2020 17:00 GMT

Hi Martin, I should have supplied my email regarding a replacement sensor lamp for my Beogram 3000. Do you have a lamp available? Thanks, Brian brianlaing@gmail.com

CDX no sound -griplets?

in Imported Content (Unmapped) · Oct 18, 2019 17:20 GMT

Then you didn't replace the reed switches? Is there any effect from the relay contacts being bridged? Would you still recommend Farnell type 240-9213 glass reed switches if I were to do that?