Hi and Welcome!

Yes the Beo4 will work fine with both TVs.

Thanks Guy! How would it work? Would both TVs answer to the same inputs? Or could I possibly configure them in "separate" buttons/commands?

Each TV will react to the remote with its own input settings.
If your gamebox is set to DVD in a TV and STB in the other, each button will trigger each input when in front of the right TV. 

You can set up the SCART inputs in each TV to chose which button on the Beo4 selects them.

On the BC1, go into the connections menu

On the MX4000, go into the 'sockets' menu

Thus if you have just one device connected to each TV, you should be able to select one TV with (eg) SAT and the other with (eg) V.TAPE.  Set unused SCART inputs to 'NONE'.

(On a newer Beo4, SAT=DTV and V.TAPE=V.MEM)

Have a play around and come back to us if you have more questions - enjoy the TVs!

Hello,

I've been searching how to control an MX4002 MCMXCII with Beo4. I had an MX7000 which suddenly goes into standby mode after 5-10 min so I'd like to use the Beo4 remote with the MX4002 instead.

I'm unable however to go into Scart 2 and use the store function ( have an old style remote with SAT and Video Tape buttons). I think I need to change the remote configuration but can't remember how.

I'd appreciate any suggestion.

Kind regards, 

Bruno

You should be able to control the MX4002 fine with the Beo4.

You need to go into the MX4002's MENU, then go to SETUP then SOCKETS.  Use the cursor arrows to select what you are connecting to each socket, and press GO to store.

Assuming that you are connecting non-B&O equipment, I suggest that you set AV1 to V.TAPE 1, and AV2 to DVD.  You should then be able to select these inputs on your Beo4 using V.TAPE or DVD respectively.