Can't access AV IN on Beovision 11 with BeoRemote One

21 replies
lundmark
Offline
lundmark
Bronze
Posted February 24, 2019 at 12:26 GMT
#2168597

There doesn't seem to be a command in the BeoRemote One to access the AV input on the Beovision 11 mk2. I've tried adding all the sources on the remote but none of them will activate the input.

There is one labeled AV IN on the remote but it activates the radio instead. Is this a bug? I will have to use the menus to access this source instead of the TV or MUSIC source buttons on the remote. Very frustrating.

 

MA
Offline
Madskp
Gold
Posted February 24, 2019 at 13:03 GMT
#2168598
On the Beoplay V1 you have to assign the AV in port to a source in the setup menu of the TV the same way you asign HDMI ports. Guess its the same on the BV11.

Location: Denmark

lundmark
Offline
lundmark
Bronze
Posted February 24, 2019 at 13:29 GMT
#2168599

This used to work when using the Beo4 remote, but there is no such option when the TV is configured to use a BeoRemote One.

Millemis
Offline
Millemis
Bronze
Posted February 24, 2019 at 15:19 GMT
#2168600

If you have started the AV IN source from the Source Menu, can you then assign a MyButton to it?

If yes, that might be a workaround.

MM

Location: Flensborg————Danmark

MA
Offline
Madskp
Gold
Posted February 24, 2019 at 15:38 GMT
#2168601
I havent tried a beoremote one, but shouldent the source be the same as on a BEO4; V.MEM for example if thats the dource assigned to the AV In port?

What source button did you use on the BEO4?

Location: Denmark

Dyssegaard
Offline
Dyssegaard
Bronze
Posted February 24, 2019 at 15:51 GMT
#2168602
lundmark wrote:

This used to work when using the Beo4 remote, but there is no such option when the TV is configured to use a BeoRemote One.

On my BeoRemote One BT I’m able to add AV IN under TV sources for my BV 11 - see screen shot below:

I do this on the remote by selecting:

LIST / Settings / TV-sources / Show / AV IN

Edit - sorry I didn’t see in your first post that you found it yourself😕

Location: Copenhagen

Best regards
Dyssegaard
lundmark
Offline
lundmark
Bronze
Posted February 24, 2019 at 15:52 GMT
#2168603

Millemissen wrote:

If you have started the AV IN source from the Source Menu, can you then assign a MyButton to it?

If yes, that might be a workaround.

MM

Yes, that's what I need to do I think.

 

madskp wrote:
I havent tried a beoremote one, but shouldent the source be the same as on a BEO4; V.MEM for example if thats the dource assigned to the AV In port?

 

What source button did you use on the BEO4?

I could use any button, because the source menu allowed for setting any of the buttons. This is not the case if the TV is set to use the BeoRemote One. Then you cannot assign buttons—the remote is supposed to have all the commands listed.

 

lundmark
Offline
lundmark
Bronze
Posted February 24, 2019 at 15:53 GMT
#2168604

Dyssegaard wrote:
On my BeoRemote One BT I’m able to add AV IN under TV sources for my BV 11 - see screen shot below:

Yes! It's there but it starts RADIO on my TV for some stupid reason! I

Dyssegaard
Offline
Dyssegaard
Bronze
Posted February 24, 2019 at 16:01 GMT
#2168605
lundmark wrote:

Yes! It's there but it starts RADIO on my TV for some stupid reason! I

I have just tried to use it, and on my BV11 it start up the AV source as expected.

Location: Copenhagen

Best regards
Dyssegaard
lundmark
Offline
lundmark
Bronze
Posted February 24, 2019 at 16:07 GMT
#2168606

Makes sense. I’ve reset my remote and the issue persists. Somethings going on with the TV 

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold