Beosound 3000 CD not working.

7 replies

Hi everybody,

This unit is equipped with CDPRO2 mech. when I insert CD unit closes the clamp CD doesn't start to spin after couple of seconds display says load CD. So I think its some kind of focus problem. I have tested both motors they are working ok and cleaned the lens. Trough camera lens I can see visible laser so its not completely dead.  Yesterday I changed all the SMD caps but this didn't fix the problem. If I remember right I have read somewhere that these mechs can suffer some diode problem.

If someone has any ideas I would appreciate them.

Best Regards,

Pete

Unfortunately I discovered the same problem with my Beosound 3000 CD Player.

Are there any hints / recommendation how to repair it?

Great, thank you very much.

Next week-end I will open my Beosound 3000 to remove the laser unit.

Did changing the laser fix your problem?

 

Did changing the laser fix your problem?

 

Did changing the laser fix your problem?

 

Replacing the laser will always solve the problem for some time. 99% will work again... for some days, months, maybe a year.

Of course also laser die...

But when in the Environment of the laser is a problem with power supplies or a defect in the regulation Loop of the laser power, then it will be killed again after some time.

First check all caps, then replace the laser. There is a reason that causes the problem, otherwise you just cure the symptom... and just for some time.

or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.