Welcome to the forum, most likely you may have bad capisitors and trimmers in the output stage, but also bad connections can cause this, as you I'm a happy amateur, here is what I did with my 901,

Before starting changing anything check the 32 volt supply voltage and the no load  current, how to should be on the diagram you found inside but take care not to shortcut anything, I did and that cost me more work than the normal cap and trimmer renewal.

Also before starting check 2R139/140 and 2R188/189 to se if they are 820 Ohm or 560/270 Ohm, in my 901 they are 560/270 and in most diagrams hey are 820.

Good luck and come back for help or with a succes report, recommend a cap and lamp kit from Martin (Dillen on the forum).

Thanks for the Welcome.

I saw your 901 post on here before I joined and it's really inspiring!! I have to say I really am an amateur so talking about trimmers and capsitors really goes over my head, not sure I would know where to start. The annoying thing is that is it such a lovely looking thing and the turntable I have adjusted and cleaned and even with one speaker working sounds great.

I don't think I have the basic knowlege to carry out a repair without blowing up a small part of England! The other thing is getting parts. It would be good to get the bulbs replaced to as they don't work either.

I am up for having ago but it would be like air traffic control talking down an aircraft flown by a passenger! If that makes sense.

James

In that case its better to find someone to do the repair, the parts you will need you can get from Martin (Dillen) he provides a set of capasitors trimmers and lamps that fits, with clear instructions how to change it.

If you cant solder or never soldered and dont know anything about electronics, dont start with the 901.

If you let it play as it is, the problems will get worse, for your speakers i recommend to change electrolitic capasitors as well, they are old and dry, your speakers will play but not as good as they can.

But dont give up, its a very nice reciever and it is worth saving, after a good repair it will play again for years, better than a lot of recievers you can buy today.

I agree, I think it's lovely and well worth the time spending on it. I shall see if I can find someone local to help me with it.

are there replcements for the electrolitic capasitors? I guess I should contact Martin?

I'll post some pictures of it all as it is.... 

Thnaks again for your help and advice.

Thats the spirit, and we love pics, before and after😁

I have been trying to locate someone who can help me with this ... local to me.. but really struggling. Is there anyone in Northamptonshire or surrounding counties handy with a soldering iron? :) 

I wanted to put some pictures of my B&O system up to but can't sem to load them .. is there a knack to this?

musicaltinkerer wrote:

I wanted to put some pictures of my B&O system up to but can't sem to load them .. is there a knack to this?

link, and wait for answers, someone in the UK will come up with something, meanwhile study this

And welcome to the Beoworld magic, beware of BeoVirus

Haha you are a wealth of knowledge Søren, thanks again. And your post on the 901 rebuild has been my bed time reading!

I am actually a photographer so I do appologise for the picture quality, I'm having the night off ! anyway here are some and I'll add some more.

Login to view image

Login to view image

Login to view image

Beautiful Items, as of the photos, field deapth or shutter time😂