Hi there Lofke,

dis you get that beomaster 8000 working again? I m having the same problems with mine.

 Greetings Steven

Hi,

I don't know if it can be related but today, when I opened my unit, I forgot to put back the tuner plug from the microcomputer, which is well hidden under those ribbon cables. Could it be a bad connection there? The plug is shown here, under the green circle :

Login to view image

Hi there, i checked that but there ‘s no signal. 

Thanks for the reply!

steven

Hi,

Can you display frequency ? 

Hi Jaques, 

Yes the freq display is normal and bright as it should be.

When turning the freq dial it goes up and down as normal.

All i hear is static like it can’t find a radio freq.

then all of the sudden i hear a very short period ( say 3 seconds) radio ( freq 89,5)

 but that goed away and leaves me with static again. Tuning it further the same radio freq comes up somewhere else ( around freq 95,5 or so)

Thats also 3 seconds and goes away.

i can do the same over and over again.

Okay then.

I'd double-check every connector (remember there's one between the two tuner boards) and only then would consider something else.

And "something else" could mean opening the processor and memory can...

I was afraid you were going to say that, but thats what i am going to do.

checked and doubled checked every conector and connection between boards.

stil no signal. so i will have to open up that memory box and resolder and check everything inside.

Thank you Jaques!