Hi Carolpa

I really works now - thank you for your great work. 

One more minor thing.... is it possible to change this code a bit?

The Ikea values are kind of reverse, so if the Value says 80% - it is 80% Open, not down/closed, which had made more sense to me

"direction=true

      else

        direction=false

      end 

      if direction then

        nr = nr + 5

        if nr>=100 then

          nr=0

        end  

      else  

        nr = nr - 5

        if nr<=0 then

          nr=100

        end"

Hi Carolpa

I really works now - thank you for your great work. 

One more minor thing.... is it possible to change this code a bit?

The Ikea values are kind of reverse, so if the Value says 80% - it is 80% Open, not down/closed, which had made more sense to me

"direction=true

      else

        direction=false

      end 

      if direction then

        nr = nr + 5

        if nr>=100 then

          nr=0

        end  

      else  

        nr = nr - 5

        if nr<=0 then

          nr=100

        end"

Hi Carolpa

I really works now - thank you for your great work. 

One more minor thing.... is it possible to change this code a bit?

The Ikea values are kind of reverse, so if the Value says 80% - it is 80% Open, not down/closed, which had made more sense to me

"direction=true

      else

        direction=false

      end 

      if direction then

        nr = nr + 5

        if nr>=100 then

          nr=0

        end  

      else  

        nr = nr - 5

        if nr<=0 then

          nr=100

        end"

CTR wrote:

is it possible to change this code a bit?

  if tonumber(event.parameters()["OFFSET"])>=1 then

        direction= true false

      else

        direction= false true

      end 

Hello all,

is there a way to have the actual temperature of each room displayed as the current temperature in the beoliving app? My approach is the following: I have installed in each room a temperature sensor (fibaro) and I have created for each room a dummy no off thermostat. I made a macro where every half hour the bli asks the temperature value of the fibaro sensor and it is diplayed by the dummy thermostat as temperature.

So far I manged to get the temperature value of the fibaro sensor with no problems but it looks that the temperature of the dummy thermostat can not be set by the user. I am using the following code:

function(event, engine) 

  local Temp_query=engine.query("House/Family Room/_THERMOSTAT_SENSOR/Temperature/")

  local temp = Temp_query[1].get("_TEMPERATURE")

  engine.fire("House/Family Room/THERMOSTAT_1SP/TEST/SET TEMPERATURE?VALUE="..tostring(temp))

end 

If you use a Home Assistant server, it's very easy to pull the temperature via this into the BLI, to show in the app: 

https://www.home-assistant.io/integrations/generic_thermostat/

I have cordless Aqara in every room, for this feature:

https://www.amazon.com/Aqara-WSDCGQ11LM-Temperature-Humidity-Sensor/dp/B07D37FKGY

Hello CTR I am not using any home assistant🙁

Today's dumb question (yes me again) 😁 I've noticed since the last two updates (maybe just coincidental) that my macros that fire when they are before sunset seem to no longer work.

I have my lat/long and time zone all correct and it shows the correct time.

Any timed Macro works perfectly it's just if I define a before sun set time, e.g., -90 shows as 

Main/global/SYSTEM/Clock/

STATE_UPDATE?bss=-90

Any idea on the obvious thing I'm not doing?

Hi benjnz,

We've been working on a fix of some sunset and sunrise issues. If you like you can write to us to support@khimo.com with your BLI serial number and we can enable to you a firmware version in testing with these fixes.

Hi Carolpa - Hi everyone.

I hope B&O and Khimo works towards making the Beoremote Halo a Beotime 2.0! 

Can we do this ourselves via LUA?

I imagine:

1.ma button on Halo with toggle Alarm On / Alarm Off

2. Possible to set alarm time on each day of the week in LUA

3. Turn on e.g. TuneIn on one's AV renderer.

Thank you for your time