Hallo again 

Thank you for your reply.

Unfortunately, this results in an error!

Deleted

CTR wrote:

Hallo again

Thank you for your reply.

Unfortunately, this results in an error!

I'm in the middle of building a new home set-up from scratch and so far i have purchased the following components:

• BLI with Pro software
• 1X BS Essence MK2 connected to 2X BL3 in the kitchen
• 1X BS Essence MK2 connected to in an active in ceiling speaker in the bathroom
• 1X BS Core intregrated to my BV14-55 with 2x BL3 in the living room

Now i'm looking at expansion. My wishes are:

- Hue lamps for all rooms + Hue Bridge

- Honeywell Evohome thermostats system for all rooms

- Outside camera system + Video doorbell.

For the latter im asking you advise. Are you guys using outside camera's and a video doorbell and can you please react which ones works seamslessy with the BLI?

CTR wrote:

Hallo again 

Thank you for your reply.

Unfortunately, this results in an error!

  engine.fire("your_area/your_zone/SHADE/BLI_Resource_name/LOWER")

  engine.fire("your_area/your_zone/SHADE/BLI_Resource_name/RAISE")

  engine.fire("your_area/your_zone/SHADE/BLI_Resource_name/SET?LEVEL=10")

try these.

SirPump wrote:

I'm in the middle of building a new home set-up from scratch and so far i have purchased the following components:

BLI with Pro software 1X BS Essence MK2 connected to 2X BL3 in the kitchen 1X BS Essence MK2 connected to in an active in ceiling speaker in the bathroom 1X BS Core intregrated to my BV14-55 with 2x BL3 in the living room

Now i'm looking at expansion. My wishes are:

- Hue lamps for all rooms + Hue Bridge

- Honeywell Evohome thermostats system for all rooms

- Outside camera system + Video doorbell.

For the latter im asking you advise. Are you guys using outside camera's and a video doorbell and can you please react which ones works seamslessy with the BLI?

Hello everyone,

Just wanted to let you know that B&O are aware of the issue that causes the Halo connectivity problems with the BLI, and they are working on the fix. We will let you know as soon as we have news on this front 🙂

Thank you Carolpa

The function works perfekt now. So if I set the Halo to 25% shades, it set the shade på 25%.

But the Shade logo on the Halo goes back to show 100% - do you have a great solution??

Have a fantastic weekend

CTR

CTR wrote:

Thank you Carolpa

The function works perfekt now. So if I set the Halo to 25% shades, it set the shade på 25%.

 

But the Shade logo on the Halo goes back to show 100% - do you have a great solution??

Have a fantastic weekend

CTR

Now I know the LEVEL settings work I will look into using the Halo wheel.

CTR wrote:

But the Shade logo on the Halo goes back to show 100% - do you have a great solution??

make two Resources 1) Fired (bbolean) and 2) No (integer)

make two events for the Halo Shade button 1) button pressed and 2) wheel turned

then use the next code:

function(event, engine) 

  -- make Resource Variable Fired (Boolean)

  -- make Resource Variable No (Integer)

  local fired_query = engine.query("Upstairs/Study/VARIABLE/Fired")

  local fired = fired_query[1].get_boolean("VALUE")

  local shadeLevel=0

  local direction

  local nr_query=engine.query("Upstairs/Study/VARIABLE/No")

  local nr = nr_query[1].get_number("VALUE")

  if nr==nil then 

    nr=1 

  end

  if not fired then

    engine.fire("Upstairs/Study/VARIABLE/Fired/SET?VALUE=true")    

    if event.parameters()["OFFSET"] then

      if tonumber(event.parameters()["OFFSET"])>=1 then

        direction= true

      else

        direction=false

      end 

      if direction then

        nr = nr + 5

        if nr>100 then

          nr=100

        end  

      else  

        nr = nr - 5

        if nr<0 then

          nr=0

        end

      end

      shadeLevel = nr

      engine.fire("Upstairs/Study/VARIABLE/No/SET?VALUE="..tostring(shadeLevel))

      engine.fire("Upstairs/Study/Halo remote/Beoremote Halo Study/SET_TEXT?BUTTON=497f6eca-6276-4993-bfeb-000000810383&TEXT="..tostring(shadeLevel))

      engine.fire("Upstairs/Study/Halo remote/Beoremote Halo Study/SET_WHEEL_VALUE?BUTTON=497f6eca-6276-4993-bfeb-000000810383&VALUE="..tostring(math.floor(shadeLevel*100/100)))

      engine.fire("Upstairs/Study/SHADE/your_shade/SET?LEVEL="..tostring(shadeLevel))

    end

  end  

  engine.fire("Upstairs/Study/VARIABLE/Fired/SET?VALUE=false")

end 

Note: I deleted  "--" previous shown incorrectly in one line.