Danke für die Info.

Wenn ich nur das Signal zu übertragen hätte würde das sicher funktionieren.

Aber der Beogram hat einen 7poligen Stecker um die Signale für die Bedienung des Tonarmes auch zu übertragen. Und diese Signale müssen ja durchgeschleift werden.

Aber Steve mal zu fragen ist sicher sinnvoll. Wenn einer eine Lösung hat, dann er🙂

Gruß

Francis

Der Splitter im ersten Link ist ja 7-polig. Aber wie du schon sagst - Steve fragen :-)

 

Hi Francis and Ralf,

Sorry for replying in English.  Yes, the Aux Splitter is the best option, as it is a 7 pin version to allow remote control of the Beogram:-

link

You can then connect a DAB radio or other music source to the other side of the splitter with this cable to share the Aux socket:-

Hi both,

thanks a lot for your help and advice. Much appreciated.

I'm sure the splitter will solve my problem. I did not notice before it has indeed 7 pins. Have just ordered one from Soundsheavenly.😁

Best regards

Francis

Thanks Francis,

 I will get this posted on Monday morning.

Kind regards, Steve.

I have also dropped you a question regarding connecting an Apple TV to an BV7 with only DVI socket.

Looking forward to your advice on that as well

Regards

Francis

PS I love the Beoworld forum. Thanks to Sounds Heavenly for sponsoring it!

Thanks Francis,

I know that some people have had success using converters between a new Apple TV and an earlier Beovision 7 TV, but the results can be variable so I don't usually recommend these.  Instead, you can use a 1st generation Apple TV with Component video outputs to the TV (these are available on eBay as pre-owned items).

Another option (which I use at home on my Beovision 8-32) is to connect an old computer to the DVI input of the TV for all your streaming video and online movies, this has the advantage of also letting you use the TV for web browsing.

Beoworld is the friendliest forum I have found online, it is a real pleasure to be able to help support it.

Kind regards, Steve.

Hi Steve,

I just received the splitter, thanks for the quick delivery.

Unfortunately, it does not work as expected. This is what I experienced:

• Only Beogram connected to splitter --> OK for sound and control of turntable
• Only Technisat DAB+ receiver connected to splitter --> OK for sound
• Both devices connected, but Technisat switched off --> very muted and heavily disturbed sound from Beogram. Control of turntable works
• Both devices connected, but Technisat switched on --> only sound from Technisat to be heard.Control of turntable works.

Do you have any Idea on how to solve the issue? Here some details of the setup for your information:

Beogram 4500 with original 7 pin connection. Technisat Digitradio 110 IR, connected via audio out (3.5 mm jack plug and cable into a 3.5 mm jack to 5 pole DIN plug adapter; the Technisat has no line out, the only other option is  an optical out). The adapter does not cause the problem. If only the adapter with the 3.5 mm plug and cable attached  is connected to the splitter while the Beogram is playing, everything is fine. Only when the  second 3.5 mm plug is then connected to the Technisat, the problem starts.

Best regards

Francis

 

Hi Francis,

I am sorry to hear that you are having problems.  It is most likely that the mains power supply for the Technisat radio is the cause of the issue.  If you unplug the 3.5mm cable from the back of the Technisat radio and instead plug it into a portable music player (eg. iPod or phone), do you get normal sound and control of the Beogram please?

Please note that you will need to turn up the iPod/phone volume to get a normal sound level.  Please let me know how you get on and I will be pleased to assist further.

Kind regards, Steve.