Hi All,
I have some 2008 Beolab 5. One of them started off being distorted. Now it crackles on and off and when it's working it sounds horrible!
I spoke with a repair dealer, who says I need a refurbished chassis.
Now I'm wondering if I could do a DIY repair. I am familiar with electronics repair, having done quite a bit of it in the past, but I'm concerned if it's feasible or practical to do.
My initial suspicion is that it's as simple as a dry joint, probably due to lead-free solder cracking up. The speaker is fine when stone cold, but gets worse as it warms up, and the symptoms have been getting worse over time.
Any thoughts?
Thanks,
Andrew