What are you working on now?

272 replies
...
GG
Offline
Gravity Graham
Bronze
Posted November 11, 2022 at 12:51 GMT
Edited March 23, 2023 at 09:12 GMT
#1650590
I'm working on a BeoMaster 1900-2.  After changing electrolytics, I am still having problems powering it up...
On investigation the ON/OFF switch has a high resistance on one side !!
Now dismantling to try and fix/replace the faulty switch before proceeding further...
Photos to follow..
Graham

Location: Cornwall, UK

Obtained HND in Electronics Engineering in 1982.
Retired in 2016, and am still 'tinkering'. Have had my Beogram 4000 and BeoMaster 1900-2 since 1984.
DA
Offline
DanteM
Bronze
Posted November 12, 2022 at 02:02 GMT
Edited November 12, 2022 at 02:02 GMT
#1650600
Gluing some basstraps on the corners and praying for wife to allow them...

 

Tignum
Offline
Tignum
Gold
Posted January 2, 2023 at 18:58 GMT
Edited January 2, 2023 at 18:58 GMT
#1652160
Replaced noisy fans with the most silent Noctua fans I could find (on sticky old ugly bedroom BV7-32 that came with a BL7-1 I bought)

Location: Netherlands

My B&O Icons:

Beoplay-A1.png Beoplay-A1.png
Beoplay-H95.png Beoplay-H95.png
Beoplay-P6.png Beoplay-P6.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beoremote-One.png Beoremote-One.png
Beosound-5.png Beosound-5.png
Beovision-10.png Beovision-10.png
pepps
Offline
pepps
GoldModerator
Posted January 4, 2023 at 22:27 GMT
#1652279
link
I’m back in the US for a little while so I’m trying to sort out one of my other previous acquisitions, BL Penta MK2. They need the full overhaul so I bought all 3 cap kits and new foam surrounds. These will be the main L/R channels in the master bedroom and the basis of a surround system (eventually!).
Looking forward to seeing/reading some more on this project.

Location: Kent, UK

My B&O Icons:

Beovision-Avant.png Beovision-Avant.png
Beoplay-H95.png Beoplay-H95.png
Beoplay-E4.png Beoplay-E4.png
Beomaster.png Beomaster.png
BeoCenter-9500.png BeoCenter-9500.png
Beofan for many years with a penchant for 1990s audio systems.
AdamS
Offline
AdamS
Bronze
Posted January 5, 2023 at 14:12 GMT
#1652292
I'm working on a big speaker drive unit re-foaming session currently.

The two drivers at the left rear are from RL140s and I'm sure you can all work out where the SIXTEEN midrange drivers at the front came from!

 
FK
Offline
fkatze
Bronze
Posted January 6, 2023 at 13:42 GMT
#1652315
It's been about 3 years I've been separated from by Beomaster 2000, but I have finally gotten it back on the bench.  I had a new tuner board made, and it has now been fit into place, and looks like it will be a goer.  Dial cord broke, so I am going to try and get it fit up again tomorrow.  That should just about be all that needs doing, though I'd like to do the AM/FM alignment, but my function generator isn't with me.  Photo's to follow as I get around to it.
armandc1
Offline
armandc1
Bronze
Posted January 12, 2023 at 17:02 GMT
#1652596
I know this post is from March, but I have to ask what the issue with that DVD1 is? I have one I got for next to nothing as it is broken but in beautiful cosmetic condition. When loading a disc it just states reading and never starts playing. Is there a common repair for this? I have heard that the DVD1 was kind of junk from the beginning but it would be great to get it going again if its simple. Disc spins and everything looks alright inside but it just wont play!

Location: Massachusetts, USA

Guy
Offline
Guy
GoldModerator
Posted January 12, 2023 at 20:49 GMT
#1652603

Location: Warwickshire, UK

My B&O Icons:

BeoCenter-9500.png BeoCenter-9500.png
Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-10.png Beovision-10.png
Beotime.png Beotime.png
Beosound.png Beosound.png
Beosound-Explore.png Beosound-Explore.png
Beosound-Essence.png Beosound-Essence.png
Beoplay-P2.png Beoplay-P2.png
Beoplay-M3.png Beoplay-M3.png
Beoplay-H4.png Beoplay-H4.png
Beoplay-H3.png Beoplay-H3.png
Beoplay-Form-2i.png Beoplay-Form-2i.png
Beoplay-Earset.png Beoplay-Earset.png
Beoplay-A2.png Beoplay-A2.png
Leosgonewild
Offline
Leosgonewild
Bronze
Posted January 13, 2023 at 17:21 GMT
#1652629
I just finished restoring this.
matador
Offline
matador
BronzeModerator
Posted January 13, 2023 at 18:34 GMT
#1652631
Nice!

Did you change the lid or is it the original one? If so how did you get it back this nice?

Location: Paris France

...
or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold