Oh wait - is your A9 a 1. Generation model?

In that case, it might (?) be possible to set a start volumen using a Beo4 (and the Sound Store command).

I am not able to test that myself - maybe someone else could.

Otherweise - contact BeoCare via the B&O website for this information.

MM

Okay now I understand. :)))

My A9 has the same problem, whatever I set as a default sound level (tried with custom:70 and LOUD) it always starts at the level of 55 or so, just like yours.

On top, in new Beosound app volume wheele does not display volume level in numbers anymore. :)

Since here are some A9 volume experts, I would like to add my similar question here.

I have an A9 2nd generation. In the setup (web interface or app), I can set the standard default volume. I have to set this at level 50 which is very high (number).

I have also an A6 and a M5. On these two devices I set default volume to 25-35 and I have the feeling, that is almost the same as 50 on the A9. But the A9 is the most expensive and therefore I think it should be a lower number. Now I'm curious if the A9 is dead/faulty? On the BeoVision Avant 55 NG I have default volume at 32. My 20 years B&O experience tell me, that default at around 35 is ok on the devices.

What is you experience? Do you also have to set a higher number on the A9.

Of course, this is very individual - but compare with other B&O devices.