Hi everyone,
Just a quick "spanner" to throw into the works! 😜 Whilst I agree that the combined Masterlink and Aerial cable is a smart idea, I would argue that Powerlink and mains power should NOT be combined together, especially not for long cable runs.
One of the first things you learn when studying electronics (after "don't cut the red wire"!) is that you should avoid running power and signal cables together. This is for a very valid reason; Powerlink audio and data signals are typically less than 1 volt, whereas mains power can be up to 240 volts depending on the country of use. Over a length of cable, the 50-60Hz frequency from the power cable will be induced into the signal wires, giving a mid-bass "buzz" through the speakers. Conventional cable screening does little to reduce this effect.
So, in summary, Powerlink plus mains power within one cable looks nice, but it is not a sensible solution (except as a last resort for very short cables runs). I don't know if anyone from Bosscomm posts on this forum, but I would be interested to hear what testing has been done on this cable in terms of electromagnetic compatibility (ie. leakage of interference from the power wires into the audio wires).
(Waiting to be shot down in flames!) 😎
Steve.